Input parameter is illegal.
Description
An invalid argument has been specified.
System action
Interrupts the processing.
Administrator response
Check the valid values for the argument, and then execute the command again.
An invalid option is specified. option=[OPTION]
Description
An invalid option has been specified.
Parameters
OPTION: The specified option
System action
Interrupts the processing.
Administrator response
Check the valid values for the option, and then execute the command again.
An invalid parameter is specified. option=[OPTION], parameter=[PARAM]
Description
An invalid parameter has been specified.
Parameters
OPTION: The specified option
PARAM: The specified parameter
System action
Interrupts the processing.
Administrator response
Check the valid values for the parameter, and then execute the command again.
An invalid option is specified. copy group=[GROUP], copy type=[TYPE], option=[OPTION]
Description
An invalid option has been specified for a copy group.
Parameters
GROUP: Copy group
TYPE: Copy type
OPTION: The specified option
System action
Interrupts the processing.
Administrator response
Check the valid values for the copy type, and then execute the command again.
This program requires administrative privileges of the operation system.
Description
This command can only be executed with Administrator privileges.
System action
Interrupts the processing.
Administrator response
Execute the command as a user with Administrator privileges.
The license is not registered.
Description
The license has not been registered yet.
System response
Interrupts the processing.
Administrator response
Register the license, and then execute the command again.
The disk array already exists. disk array=[DISKARRAY]
Description
Information for the specified ETERNUS Disk storage system has already been registered.
Parameters
DISKARRAY: ETERNUS name or ETERNUS Disk storage system IP address
System action
Interrupts the processing.
Administrator response
Use acarray list (Command for displaying information about ETERNUS Disk storage systems) to check whether the specified ETERNUS name is correct.
The copy group already exists. copy group=[GROUP]
Description
The copy group has already been registered.
Parameters
GROUP: Copy group name
System action
Interrupts the processing.
Administrator response
Execute the command again, specifying a copy group name that has not been registered yet.
The pair already exists. copy group=[GROUP], pair=[PAIR]
Description
The copy pair has already been registered.
Parameters
GROUP: Copy group name
PAIR: Copy pair name
System action
Interrupts the processing.
Administrator response
Execute the command again, specifying a copy pair name that has not been registered yet.
An invalid pair is specified. pair=[PAIR], detail=[DETAIL]
Description
An invalid copy pair has been specified.
Parameters
PAIR: Copy pair name
DETAIL: Detailed information about the cause of the error
The DETAIL is will be one of the following strings:
Strings indicated in DETAIL | Cause of error |
---|---|
invalid format | The format of the copy pair is incorrect. |
invalid disk array | The specified ETERNUS Disk storage systems have not been set up for the copy group. |
same disk array | The same ETERNUS Disk storage systems have been specified for both the copy source and the copy destination. |
invalid copy direction | The copy direction is not the same as the other copy pairs that have already been added to the copy group. |
invalid Snap Data Volume | The copy-destination logical volume of the specified copy pair is not Snap Data Volume. |
old disk array info | The ETERNUS Disk storage system was not re-registered when the version up was done. |
System action
Interrupts the processing.
Administrator response
The action required depends on the DETAIL string, as described below:
Strings indicated in DETAIL | Appropriate action |
---|---|
invalid format | Execute the command again, specifying a correct format for the copy pair. |
invalid disk array | Execute the command again, specifying the ETERNUS Disk storage systems that has been set up for the copy group. |
same disk array | Execute the command again, specifying different ETERNUS Disk storage systems for the copy source and the copy destination. |
invalid copy direction | Execute the command again, using the same copy direction as for the other copy pairs that have already been added to the copy group. |
invalid Snap Data Volume | Execute the command again, specifying the Snap Data Volume for the copy-destination logical volume. |
old disk array info | Execute the command again, after the re-registration of ETERNUS Disk storage system. |
An invalid volume is specified. volume=[VOLUME], detail=[DETAIL]
Description
An invalid logical volume has been specified.
Parameters
VOLUME: Logical volume name
DETAIL: Detailed information about the cause of the error
The DETAIL is will be one of the following strings:
Strings indicated in DETAIL | Cause of error |
---|---|
invalid format | The format of the logical volume is incorrect. |
System action
Interrupts the processing.
Administrator response
The action required depends on the DETAIL string, as described below:
Strings indicated in DETAIL | Appropriate action |
---|---|
invalid format | Confirm the format of logical volume. And then execute the command again, specifying a correct format. |
The number of generation is exceeded the registerable number. Maximum Number of Generation=[NUMBER]
Description
The number of generations registerable to a copy group is exceeded.
Parameters
NUMBER: Maximum number of generation that can be registered
System action
Interrupts the processing.
Administrator response
Check whether the number of copy pairs that have the same copy-source logical volume is exceeded the maximum number or not.
The REC buffer could not be found. ID=[ID]
Description
The specified buffer ID does not exist.
Parameters
ID: ID of the REC transfer buffer
System action
Interrupts the processing.
Administrator response
Execute the command again, specifying the correct ID.
An invalid access path is specified. access path=[PATH], detail=[DETAIL]
Description
An invalid access path has been specified.
Parameters
PATH: Access path
DETAIL: Detailed information about the cause of the error
The DETAIL is will be one of the following strings:
Strings indicated in DETAIL | Cause of error |
---|---|
invalid access path | The access path is incorrect. |
System action
Interrupts the processing.
Administrator response
The action required depends on the DETAIL string, as described below:
Strings indicated in DETAIL | Appropriate action |
---|---|
invalid access path | Execute the command again, specifying the access path of the specifying ETERNUS Disk storage systems. |
The disk array does not exist. disk array=[DISKARRAY]
Description
There is no information for the specified ETERNUS Disk storage system.
Parameters
DISKARRAY: ETERNUS name
System action
Interrupts the processing.
Administrator response
Use acarray list (Command for displaying information about ETERNUS Disk storage systems) to check whether the specified ETERNUS name is correct.
The disk array does not exist. disk array=[BOXID]
Description
There is no information for the specified ETERNUS Disk storage system.
Parameters
BOXID: The box ID of ETERNUS Disk storage systems
System action
Interrupts the processing.
Administrator response
The information for the ETERNUS Disk storage system specified by the BOXID has been deleted.
Register the same box ID information for the specified ETERNUS Disk storage system again, and then execute the command again.
The copy group is not found. copy group=[GROUP]
Description
The specified copy group has not been set up.
Parameters
GROUP: Copy group name
System action
Interrupts the processing.
Administrator response
Use acgroup list (Copy group display command) to check whether the specified copy group name is correct.
The pair is not found. copy group=[GROUP]
Description
The copy pair has not been set up for the specified copy group.
Parameters
GROUP: Copy group name
System action
Interrupts the processing.
Administrator response
Set up the copy pair for the specified copy group, and then execute the command again.
The pair is not found. copy group=[GROUP], pair=[PAIR]
Description
The specified copy pair has not been set up for the copy group.
Parameters
GROUP: Copy group name
PAIR: Copy pair name
System action
Interrupts the processing.
Administrator response
Set up the specified copy pair for the copy group, and then execute the command again.
The logical volume is not found. logical volume=[VOLUME]
Description
The specified logical volume does not exist.
Parameters
VOLUME: Logical volume name
System action
Interrupts the processing.
Administrator response
Execute the command again, specifying an existing logical volume.
An invalid copy group is specified. copy group=[GROUP], copy type=[TYPE]
Description
The operation that the user is trying to execute cannot be performed on the specified copy group.
Parameters
GROUP : The specified copy group
TYPE : The copy type set in the copy group
System action
Interrupts the processing.
Administrator response
Check the copy type that has been set up for the specified copy group.
The logical volume is not found. copy group=[GROUP], logical volume=[VOLUME]
Description
There is no logical volume.
Parameters
GROUP: The specified copy group
VOLUME: Logical volume name
System action
Interrupts the processing.
Administrator response
Execute the command again, specifying an existing copy source logical volume in the specified copy group.
Remote ETERNUS Disk storage system cannot be specified. disk array=[DISKARRAY]
Description
The remote ETERNUS Disk storage systems cannot be specified.
Parameters
DISKARRAY: The name of ETERNUS Disk storage systems
System action
Interrupts the processing.
Administrator response
Confirm the specified ETERNUS Disk storage system is not a remote ETERNUS Disk storage system.
Use acarray list (Command for displaying information about ETERNUS Disk storage systems) with the remote option to check whether the specified ETERNUS name is correct.
Operation aborted. The configuration file is in use.
Description
Processing was interrupted because a CCM configuration file was being updated by one of the commands listed below:
acarray add
acarray change
acarray remove
acgroup create
acgroup remove
acpair add
acpair remove
System action
Interrupts the processing.
Administrator response
Wait for the conflicting command to finish, and then execute the command again.
Operation failed. function=[FUNC], message=[MSG]
Description
The process has failed.
Parameters
FUNC: Process name
MSG: Message
System action
Interrupts the processing.
Administrator response
Take the appropriate action according to the error message.
Operation failed. function=[FUNC], message=[MSG]
Description
The process has failed.
Parameters
FUNC: Process name
MSG: Message
System action
Interrupts the processing.
Administrator response
Take the appropriate action indicated by the "D.4.2 Detailed Messages" displayed in the MSG section.
Operation failed. function=[FUNC], message=[MSG]
Description
The process has failed.
Parameters
FUNC: Process name
MSG: Message
System action
Interrupts the processing.
Administrator response
Take the appropriate action indicated by the "D.4.2 Detailed Messages" displayed in the MSG section.
If a message not listed in "D.4.2 Detailed Messages" is displayed, then please refer to "Appendix E Detail Error Messages of ETERNUS".
An invalid mount point is specified. mount point=[MNTP]
Description
An invalid mount point or drive letter has been specified.
Parameters
MNTP: The mount point or drive letter
System action
Interrupts the processing.
Administrator response
Check the mount point or drive letter, and then execute the command again. For details on how to check mount points and drive letters, refer to acgetvolinfo (Displaying logical volume information).
An invalid device is specified. device=[DEVICE]
Description
An invalid device has been specified.
Parameters
DEVICE: Device
System action
Interrupts the processing.
Administrator response
Devices must be specified using the following format: "PhysicalDrive [device number]". Execute the command again, specifying a valid format for the device.
A general system function failed. function=[FUNC], error=[ERROR]
Description
The execution of a system function has failed.
Parameters
FUNC: System function
ERROR: Error content
System action
Interrupts the processing.
Administrator response
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
Could not open the registry. registry key=[KEY]
Description
Opening a registry has failed.
Parameters
KEY: Name of the registry key
System action
Interrupts the processing.
Administrator response
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
Could not open the file. file=[FILE]
Description
Opening a file has failed.
Parameters
FILE: File name
System action
Interrupts the processing.
Administrator response
Check the status of the file system.
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
Could not write the file. file=[FILE]
Description
Writing to a file has failed.
Parameters
FILE: File name
System action
Interrupts the processing.
Administrator response
Check the status of the file system.
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
Could not delete the file. file=[FILE]
Description
Deleting a file has failed.
Parameters
FILE: File name
System action
Interrupts the processing.
Administrator response
Check the status of the file system.
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
Could not start Java VM.
Description
Starting the Java VM has failed.
System action
Interrupts the processing.
Administrator response
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
A memory allocation failed.
Description
Allocating a memory area has failed.
System action
Interrupts the processing.
Administrator response
Check the memory usage status.
If there is not enough memory, then increase it.
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
Could not read the file. file=[FILE]
Description
Reading a file has failed.
Parameters
FILE: File name
System action
Interrupts the processing.
Administrator response
Check the status of the file system.
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
License Manager is not installed.
Description
The License Manager has not been installed.
System response
Interrupts the processing.
Administrator response
Install the License Manager and register the license. And then execute the command again.
The configuration file has an invalid format. file=[FILE]
Description
The content of the configuration file is invalid.
Parameters
FILE: File name
System action
Interrupts the processing.
Administrator response
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
An error occurred in accessing the Java property file. property=[PROPERTY]
Description
A Java property could not be looked up.
Parameters
PROPERTY: Property name
System action
Interrupts the processing.
Administrator response
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE
An unexpected error occurred.
Description
A system error has occurred.
System action
Interrupts the processing.
Administrator response
Refer to acmcapture (troubleshooting data collection command) to collect the data necessary for troubleshooting by acmcapture command, and then contact a Fujitsu SE