Input parameter is illegal.
Description
An invalid argument has been specified.
System response
Interrupts the processing.
System administrator response
Check the valid values for the argument, and then execute the command again.
An invalid option is specified. option=[OPTION]
Description
An invalid option has been specified.
Parameters
OPTION: The specified option
System response
Interrupts the processing.
System administrator response
Check the valid values for the option, and then execute the command again.
An invalid parameter is specified. option=[OPTION], parameter=[PARAMETER]
Description
An invalid parameter has been specified.
Parameters
OPTION: The specified option
PARAMETER: The specified parameter
System response
Interrupts the processing.
System administrator response
Check the valid values for the parameter, and then execute the command again.
An invalid option is specified. copy group=[COPYGROUP], copy type=[COPYTYPE], option=[OPTION]
Description
An invalid option has been specified for a copy group.
Parameters
COPYGROUP: Copy group
COPYTYPE: Copy type
OPTION: The option that was specified
System response
Interrupts the processing.
System administrator response
Check the valid values for the copy type, and then execute the command again.
This program requires administrative privileges of the operation system.
Description
This command can only be executed with Administrator privileges.
System response
Interrupts the processing.
System administrator response
Execute the command as a user with Administrator privileges.
The disk array already exists. disk array=[DISKARRAY]
Description
Information for the specified ETERNUS storage system has already been registered.
Parameters
DISKARRAY: ETERNUS name or ETERNUS storage system IP address
System response
Interrupts the processing.
System administrator response
Execute the command again, specifying a ETERNUS name or ETERNUS storage IP address that has not been registered yet.
The copy group already exists. copy group=[COPYGROUP]
Description
The copy group has already been registered.
Parameters
COPYGROUP: Copy group name
System response
Interrupts the processing.
System administrator response
Execute the command again, specifying a copy group name that has not been registered yet.
The pair already exists. copy group=[COPYGROUP], pair=[PAIR]
Description
The copy pair has already been registered.
Parameters
COPYGROUP: Copy group name
PAIR: Copy pair name
System response
Interrupts the processing.
System administrator response
Execute the command again, specifying a copy pair name that has not been registered yet.
An invalid pair is specified. pair=[PAIR], detail=[DETAIL]
Description
An invalid copy pair has been specified.
Parameters
PAIR: Copy pair name
DETAIL: Detailed information about the cause of the error
This will be one of the following strings:
"invalid format"
"invalid disk array"
The following strings appear only when the copy type specified for the copy group is "REC":
"same disk array"
"invalid copy direction"
System response
Interrupts the processing.
System administrator response
The action required depends on the DETAIL string, as described below:
"invalid format"
The format of the copy pair is incorrect.
Execute the command again, specifying a correct format for the copy pair.
"invalid disk array"
The specified ETERNUS storage system has not been set up for the copy group.
Execute the command again, specifying an ETERNUS storage system that has been set up for the copy group.
"same disk array"
The same ETERNUS storage system has been specified for both the copy source and the copy destination.
Execute the command again, specifying different ETERNUS storage systems for the copy source and the copy destination.
"invalid copy direction"
The copy direction is not the same as the other copy pairs that have already been added to the copy group.
Execute the command again, using the same copy direction as for the other copy pairs that have already been added to the copy group.
The disk array does not exist. disk array=[DISKARRAY]
Description
There is no information for the specified ETERNUS storage system.
Parameters
DISKARRAY: ETERNUS name
System response
Interrupts the processing.
System administrator response
Use A.2.3 acarray list (Command for displaying information about ETERNUS storage systems) to check whether the specified ETERNUS name is correct.
The disk array does not exist. disk array=[BOX-ID]
Description
There is no information for the specified ETERNUS storage system.
Parameters
BOX-ID: The box ID for the ETERNUS storage system
System response
Interrupts the processing.
System administrator response
The information for the ETERNUS storage system specified by the BOX-ID has been deleted.
Register the same box ID information for the specified ETERNUS storage system again, and then execute the command again.
The copy group is not found. copy group=[COPYGROUP]
Description
The specified copy group has not been set up.
Parameters
COPYGROUP: Copy group name
System response
Interrupts the processing.
System administrator response
Use A.4.2 acgroup list (Copy group display command) to check whether the specified copy group name is correct.
The pair is not found. copy group=[COPYGROUP]
Description
The copy pair has not been set up for the specified copy group.
Parameters
COPYGROUP: Copy group name
System response
Interrupts the processing.
System administrator response
Set up the copy pair for the specified copy group, and then execute the command again.
The pair is not found. copy group=[COPYGROUP], pair=[PAIR]
Description
The specified copy pair has not been set up for the copy group.
Parameters
COPYGROUP: Copy group name
PAIR: Copy pair name
System response
Interrupts the processing.
System administrator response
Set up the specified copy pair for the copy group, and then execute the command again.
The logical volume is not found. logical volume=[LOGICAL-VOLUME]
Description
The specified logical volume does not exist.
Parameters
LOGICAL-VOLUME: Logical volume
System response
Interrupts the processing.
System administrator response
Execute the command again, specifying an existing logical volume.
An invalid copy group is specified. copy group=[COPYGROUP], copy type=[COPYTYPE]
Description
The operation that the user is trying to execute cannot be performed on the specified copy group.
Parameters
COPYGROUP: The specified copy group
COPYTYPE: The copy type set in the copy group
System response
Interrupts the processing.
System administrator response
Check the copy type that has been set up for the specified copy group.
Operation aborted. The configuration file is in use.
Description
Processing was interrupted because an AdvancedCopy Manager CCM configuration file was being updated by one of the commands listed below:
acarray add
acarray change
acarray remove
acgroup create
acgroup remove
acpair add
acpair remove
System response
Interrupts the processing.
System administrator response
Wait for the conflicting command to finish, and the execute the command again.
Operation failed. function=[FUNCTION], message=[MESSAGE]
Description
The process has failed.
Parameters
FUNCTION: Process name
MESSAGE: Message
System response
Interrupts the processing.
System administrator response
Take the appropriate action according to the error message.
Operation failed. function=[FUNCTION], message=[MESSAGE]
Description
The process has failed.
Parameters
FUNCTION: Process name
MESSAGE: Message
System response
Interrupts the processing.
System administrator response
Take the appropriate action indicated by the "B.2.1 Detailed Messages" section displayed in the MESSAGE section.
Operation failed. function=[FUNCTION], message=[MESSAGE]
Description
The process has failed.
Parameters
FUNCTION: Process name
MESSAGE: Message
System response
Interrupts the processing.
System administrator response
Take the appropriate action indicated by the "B.2.1 Detailed Messages" section displayed in the MESSAGE section.
If a message not listed in "B.2.1 Detailed Messages" is displayed, then please refer to "Detailed Error Messages for the GR Series" in the "ETERNUS SF AdvancedCopy Manager Message Guide".
An invalid mount point is specified. mount point=[MOUNTPOINT]
Description
An invalid mount point or drive letter has been specified.
Parameters
MOUNTPOINT: The mount point or drive letter
System response
Interrupts the processing.
System administrator response
Check the mount point or drive letter, and then execute the command again. For details on how to check mount points and drive letters, refer to "A.7.2 acgetvolinfo (Logical volume information display command [UNIX])"
An invalid device is specified. device=[DEVICE]
Description
An invalid device has been specified.
Parameters
DEVICE: Device
System response
Interrupts the processing.
System administrator response
Devices must be specified using the following format: "PhysicalDrive [device number]". Execute the command again, specifying a valid format for the device.
A general system function failed. function=[FUNCTION], error=[ERROR]
Description
The execution of a system function has failed.
Parameters
FUNCTION: System function
ERROR: Error content
System response
Interrupts the processing.
System administrator response
Gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
Could not open the registry. registry key=[KEY]
Description
Opening a registry has failed.
Parameters
KEY: Name of the registry key
System response
Interrupts the processing.
System administrator response
Gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
Could not open the file. file=[FILE]
Description
Opening a file has failed.
Parameters
FILE: File name
System response
Interrupts the processing.
System administrator response
Check the status of the file system.
If the file system is normal, then gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
Could not write the file. file=[FILE]
Description
Writing to a file has failed.
Parameters
FILE: File name
System response
Interrupts the processing.
System administrator response
Check the status of the file system.
If the file system is normal, then gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
Could not delete the file. file=[FILE]
Description
Deleting a file has failed.
Parameters
FILE: File name
System response
Interrupts the processing.
System administrator response
Check the status of the file system.
If the file system is normal, then gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
Could not start Java VM.
Description
Starting the Java VM has failed.
System response
Interrupts the processing.
System administrator response
Gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
A memory allocation failed.
Description
Allocating a memory area has failed.
System response
Interrupts the processing.
System administrator response
Check the memory usage status.
If there is not enough memory, then increase it.
If there is enough memory, then gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
Could not read the file. file=[FILE]
Description
Reading a file has failed.
Parameters
FILE: File name
System response
Interrupts the processing.
System administrator response
Check the status of the file system.
If the file system is normal, then gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
The configuration file has an invalid format. file=[FILE]
Description
The content of the configuration file is invalid.
Parameters
FILE: File name
System response
Interrupts the processing.
System administrator response
Gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
An error occurred in accessing the Java property file. property=[PROPERTY]
Description
A Java property could not be looked up.
Parameters
PROPERTY: Property name
System response
Interrupts the processing.
System administrator response
Gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
An unexpected error occurred.
Description
A system error has occurred.
System response
Interrupts the processing.
System administrator response
Gather the information needed to resolve the problem as described in "C.1 How to Collect Data", and then contact a Fujitsu SE.
