This sub-section explains the changing the operating environment of the cluster operating.
Change the IP address of a Storage Management Server transaction as follows.
Check whether the Storage Management Server is operating.
If it is stopped, start up the Storage Management Server transaction.
Refer to the relevant cluster software manual for details on how to do this.
Check whether the Storage Management Server transaction also functions as a Storage Server transaction. If it does, and is defined as a replication source or destination volume using a replication management function, delete the source / replica volume configuration. For details on how to do this, refer to "Deleting an original volume or replica volume" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
Stop Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
Change the IP address resource.
For details on how to do this, refer to the relevant cluster software manual.
Check whether the Storage Management Server is operating.
If it is stopped, start the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
On the node on which the Storage Management Server transaction is running, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On all the Storage Servers managed by the Storage Management Server, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Server.
On all the Tape Servers managed by the Storage Management Server, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Tape Server.
Restart the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
When using the replication operation, reset the environment of replication operation.
Refer to "Replication operations" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" that is applicable to the Storage Management Server operating system, and perform the tasks under "Preparations", starting with "Replication source volume settings and replication destination volume settings".
Note
The IP address displayed by the cluster setup command executed to delete the cluster environment of the Storage Server transaction is not the IP address newly specified, but the IP address specified by the cluster setup command.
Change the IP address of a Storage Server transaction as follows.
Check whether the Storage Server transaction is operating.
If it is not operating, start the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
When you define a replication source or replication destination volume using a replication management function, delete the source / replica volume configuration, referring to "Deleting an original volume or replica volume" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Server.
Stop the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
Change the IP address resource.
For details on how to do this, refer to the relevant cluster software manual.
Check whether the Storage Server transaction is operating.
If it is not operating, start the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
On the server list view of the AdvancedCopy Manager GUI, select the server whose information is to be changed, then select [Change of server...] on the [Operation] menu. Change the IP address and press [OK] on the "Change of server" dialog.
Alternatively, change the IP address using the server information change command on the Storage Management Server. For the details on this command, refer to "stgxfwcmmodsrv (Server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On the Tape Server that is associated with the relevant Storage Server transaction, execute the server information change report command to reflect the change of the server name to the Tape Server management information. For details of the server information change report command, see "11.4.12 tbomodsrv (Server information change notification command)". The "11.2.1.2 acmsvrdisp (Storage Server configuration information display command)" can be used to check which Tape server is associated with the Storage Server.
To use the replication operation, reset the replication operation environment.
Refer to "Replication operations" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" that is applicable to the Storage Management Server operating system, and perform the tasks under "Preparations", starting with "Replication source volume settings and replication destination volume settings".
Change the port number of a Storage Management Server transaction as follows.
Check whether the Storage Management Server transaction is operating.
When it is not operating, start the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
Check whether the Storage Management Server transaction is also operated a Storage Server transaction. If it does, and is defined as a replication source or replication destination volume using a replication management function, delete the source / replica volume configuration. Refer to "Deleting an original volume or replica volume" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
Stop the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
On the primary and secondary nodes, change the port number of the communications daemon for Storage Management Server transaction (stgxfws_<logical node name>), described at /etc/services.
Check whether the Storage Management Server transaction is operating.
If it is not operating, start the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
On the Storage Management Server transaction, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On all the Storage Servers managed by the Storage Management Server, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Server.
On all the Tape Servers managed by the Storage Management Server, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Tape Server.
Restart the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
To use the replication operation, reset the replication operation environment.
Refer to "Replication operations" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" that is applicable to the Storage Management Server operating system, and perform the tasks under "Preparations", starting with "Replication source volume settings and replication destination volume settings".
Change the port number of a Storage Server transaction as follows.
Check whether the Storage Server transaction is operating.
When it is not operating, start the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
When it is defined as a replication source or destination volume using a replication management function, delete the source / replica volume configuration. Refer to "Deleting an original volume or replica volume" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Server.
Stop the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
On the primary and secondary nodes, change the port number of the communications daemon for Storage Server transaction (stgxfws_<logical node name>), described at /etc/services.
Check whether the Storage Server transaction is operating.
If it is not operating, start the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
On the server list view of the AdvancedCopy Manager GUI, select the server whose information is to be changed, then select [Change of server...] on the [Operation] menu. Change the port number and press [OK] on the "Change of server" dialog.
Alternatively, change the port number using the server information change command on the Storage Management Server. For details on this command, refer to "stgxfwcmmodsrv (Server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On the Tape Server that is associated with the Storage Server transaction, execute the server information change report command to reflect the change of the server name to the Tape Server management information. For details of this command, refer to "11.4.12 tbomodsrv (Server information change notification command)". The "11.2.1.2 acmsvrdisp (Storage Server configuration information display command)" can be used to check which Tape server is associated with the Storage Server.
To use the replication operation, reset the replication operation environment.
Refer to "Replication operations" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" that is applicable to the Storage Management Server operating system, and perform the tasks under "Preparations", starting with "Replication source volume settings and replication destination volume settings".
Change the server name of a Storage Management Server transaction by performing the steps below. If you set the logical node name as the same as the server name (when you change a logical node name), see "9.4.2.8 Changing the logical node name".
Check whether the Storage Management Server transaction is operating.
When it is not operating, start the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
Check whether the Storage Management Server transaction is also operated as a Storage Server transaction. If it does, and is defined as a replication source or destination volume using a replication management function, delete the source / replica volume configuration. Refer to "Deleting an original volume or replica volume" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On the server list view of the AdvancedCopy Manager GUI, select the server whose information is to be changed, then choose [Change of server...] from the [Operation] menu. Change the server name and press [OK] on the "Change of server" dialog.
Alternatively, the server name can be changed using the server information change command on the Storage Management Server. For details on this command, refer to "stgxfwcmmodsrv (Server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On all the Storage Servers managed by the Storage Management Server, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Server.
On all the Tape Servers managed by the Storage Management Server, execute the management server information change command. For details of this command, refer to "stgcmmodnode (Management server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Tape Server.
To use the backup operation, set the backup operation environment.
To use the replication operation, set the replication operation environment.
Refer to "Replication operations" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" that is applicable to the Storage Management Server operating system, and perform the tasks under "Preparations", starting with "Replication source volume settings and replication destination volume settings".
Change the server name of a Storage Server transaction by performing the steps below. If you set the logical node name as the same as the server name (when you change a logical node name), see "9.4.2.8 Changing the logical node name".
Check whether the Storage Server transaction is operating.
When it is not operating, start the Storage Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
Delete the environment of the Storage Server transaction.
When it is defined as a replication source or destination volume using a replication management function, delete the source / replica volume configuration. Refer to "Deleting an original volume or replica volume" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Server.
On the server list view of the AdvancedCopy Manager GUI, select the server whose information is to be changed, then choose [Change of server...] from the [Operation] menu. Change the server name and press [OK] on the "Change of server" dialog.
Alternatively, change the server name using the server information change command on the Storage Management Server. For details on this command, refer to "stgxfwcmmodsrv (Server information change command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" for the operating system of the target Storage Management Server.
On the Tape Server that is associated with the Storage Server transaction, execute the server information change report command to reflect the change of the server name to the Tape Server management information. For details of this command, refer to "11.4.12 tbomodsrv (Server information change notification command)". The "11.2.1.2 acmsvrdisp (Storage Server configuration information display command)" can be used to check which Tape server is associated with the Storage Server.
To use the backup operation, set the backup operation environment.
To use the replication operation, set the replication operation environment.
Refer to "Replication operations" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide" that is applicable to the Storage Management Server operating system, and perform the tasks under "Preparations", starting with "Replication source volume settings and replication destination volume settings".
Change the repository access user by performing the following steps:
Check whether the Storage Management Server transaction is operating.
When it is not operating, start the Storage Management Server transaction.
For details on how to do this, refer to the relevant cluster software manual.
Change the repository access user. For details on how to do this, refer to "9.4.1.12 Change of password or deletion of the repository access user".
For details on how to change the logical node name of a Storage Management Server transaction or Storage Server transaction, refer to "Changing the logical node name" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment" for the operating system of the target Servers.
The server name will also need to be changed.
For a Storage Management Server transaction, follow steps 3 to 5 in "9.4.2.5 Changing the server name of a Storage Management Server transaction".
For a Storage Server application, follow steps 3 and 4 in "9.4.2.6 Changing the server name of a Storage Server transaction".
For details on how to change the transaction name of a Storage Management Server transaction or Storage Server transaction, refer to "Changing the service name" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment" for the operating system of the target Servers.
Add the following to the data to be backed up and restored:
Pre-processing and post-processing scripts
Pre-processing and post-processing scripts for tape copying
For details on how to change the shared disk for AdvancedCopy Manager (the mount point name of the physical disk or the shared disk for shared data), refer to "Changing the shared disk for AdvancedCopy Manager shared data" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment" for the operating system of the target Servers.
Add the following to the data to be backed up and restored.
Pre-processing and post-processing scripts
Pre-processing and post-processing scripts for tape copying
For details on how to change the shared disk for AdvancedCopy Manager, refer to "Changing the shared disk for AdvancedCopy Manager repository" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment" for the operating system of the target Servers.
Add the following to the data to be backed up and restored.
Pre-processing and post-processing scripts
Pre-processing and post-processing scripts for tape copying
