ETERNUS SF Storage Cruiser 14.0 User's Guidefor Virtual Storage Conductor

5.2.1 Releasing virtual targets

You must release the assigned physical disks from the virtual target as described below.

1. Activate the "Assign/Release Virtual Disk" dialog using one of the following methods:

   • Select the virtual target assigned with the virtual disk from the Composition Data tree area, then click the <Assign/Release Virtual Disk> button, or

   • Select the virtual target assigned with the virtual disk, then click [Operations] - [Virtual Disk] - [Assign/Release], or

   • Right-click the virtual target assigned with the virtual disk, then click "Assign/Release Virtual Disk".

2. The "Assign/Release Virtual Disk" dialog box then appears.

3. Perform the following in the "Assign/Release Virtual Disk" dialog box.

   1. Select the virtual disk(s) that you want to release from the selection in the "Virtual Disk Assignment Information" table.

   2. Select the <Release> button.

      • All virtual disks can be selected by clicking the <Select All> button.
        When all the virtual disks are selected, they can be released by clicking the <Clear> button.

   3. The "Virtual Disk Information" table then displays the list of virtual disks released.

   4. Click the <OK> button on the "Assign/Release Virtual Disk" dialog box.

4. The "Assign/Release Virtual Disk" confirmation dialog then appears. Click the <OK> button.

5. The "Assign/Release Virtual Disk" dialog displays the result of releasing the virtual disks from the virtual target. Click the <Close> button.

6. Confirm on the display and the creation screen that the virtual disks have been released from the virtual target.

   All virtual disks are now successfully released from the virtual target.