If the ETERNUS disk array device and Fibre Channel switch icons are dropped onto the Performance Management window, the logical configuration tree of the device can be displayed as shown below.
"AffinityGroup" indicates a number of the zone function of the selected storage system.
"LUN" indicates a logical unit number from the point of view of the server node. Since this is allocated with Logical Volume (OLU and LUN_V) that specifies a number unique to a device managed in the device, this is expressed as "LUN X(Logical Volume X)" in the tree.
"RAID Group" located under "LUN" indicates that LUN is included in "RAID Group" (rank). [Disk](=physical drive) under [RAIDGroup] or [RAIDGroup [X- X]] indicates the drive used to configure the rank. [LogicalVolume] under [RAIDGroup] or [RAIDGroup [X- X]] indicates the numbers of other LogicalVolumes that belong to the same RAIDGroup. [RAIDGroup X- X] also has devices that are not shown.
[fc X/Y] and [port Y] are the Fibre Channel switch ports. X is "Slot Number", and Y is "Port Number".
X and Y are hexadecimal numbers that start with "0x". Other numbers are decimal numbers.
Place the mouse cursor on the device name on the tree to display the properties as tool tips.
Tool tip contents | |
---|---|
Device Name | Device Name |
IP address | |
LUN X | LUN capacity |
Existence of a LUN concatenation function application. If the LUN was created using the LUN concatenation function, "[Concatenation]" is displayed. | |
Existence of an encryption target. If there is an encryption target, "[Encryption]" is displayed. | |
RAIDGroup, RAIDGroup [X -X] | Existence of a LUN concatenation function application. If the LUN was created using the LUN concatenation function, "[Concatenation]" is displayed. |
Existence of an encryption target. If there is an encryption target, "[Encryption]" is displayed. | |
RAIDGroup X | RAID level |
RAIDGroup capacity | |
CM (CPU) name allocated in the RAIDGroup | |
Existence of a LUN concatenation function application. If the LUN was created using the LUN concatenation function, "[Concatenation]" is displayed. | |
Existence of an encryption target. If there is an encryption target, "[Encryption]" is displayed. | |
LogicalVolume X | LogicalVolume capacity |
Existence of a LUN concatenation function application. If the LUN was created using the LUN concatenation function, "[Concatenation]" is displayed. | |
Existence of an encryption target. If there is an encryption target, "[Encryption]" is displayed. | |
CM X | CM (CPU) cache memory capacity |
Port X, fc X/X | Maximum transfer rate |