Event traps are messages reported from a device. If you have any questions about the message contents, refer to the instruction manual for hardware to take corrective actions.
Depending on the event level, the corresponding icon may turn red (Error) or yellow (Warning).
(In case of the level "Information," the icon color is not changed.)
Failure event | Level | Event display |
|---|---|---|
Media error | Warning | The media error occurred. (Barcode label: xxxxxxxx). |
Drive error | Error | The drive unit0 error occurred. |
Drive offline | Information | The drive unit0 became offline. |
Drive fan alarm | Error | The drive unit0 FAN alarm occurred. |
Cleaning request | Warning | The drive unit0 needs cleaning. |
Drive LinkDown | Information | The drive unit0 Link Down occurred. |
FC-CA error | Error | The adapter0 error occurred. |
CM reader error or CM error in medium | Warning | The CM reader error or CM error in medium occurred. |
Barcode Reader error | Warning | The barcode reader error occurred. |
CAS error | Warning | The CAS unit0 error occurred. |
BBU alarm | Warning | The battery unit error occurred. |
FAN-1 alarm | Warning | The library FAN(1) error occurred. |
FAN-2 alarm | Warning | The library FAN(2) error occurred. |
Library error | Error | The library system error occurred. (FSC=xxxxxxxx) |
Front door open | Information | The front door opened on the library system. |
Library offline | Information | The library system became offline. |
CIC sensor error | Warning | The CIC sensor error occurred. |
CAS open error | Warning | The CAS unit0 open error occurred. |
FC-CA LinkDown | Information | The adapter0 Link Down occurred. |
Flash ROM error | Warning | The FlashROM error occurred. |
FC-CA not installed alarm | Warning | No install adapter card in library system. |
PDU power supply error | Warning | The PDU0 error occurred. |
PDU power supply interception | Warning | The PDU0 power off occurred. |
