hvw -n symfoPT
monaco: Main configuration menu, current configuration: symfoPT
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 3
Creation: Application type selection menu:
1) HELP 7) GENERIC
2) QUIT 8) SYMFOWARE
3) RETURN
4) OPTIONS
5) CRM
6) DEMO
Application Type: 4
Creation: Set menu options:
1) ShowAllAvailableWizards
2) ShowTurnKeyWizardsOnly
Application Type: 1
Creation: Application type selection menu:
1) HELP 10) Crm 19) Rawdisk
2) QUIT 11) DEMO 20) SYMFOWARE
3) RETURN 12) Demo 21) Symfoware
4) OPTIONS 13) Fsystem 22) SystemState2
5) Application 14) GENERIC 23) SystemState3
6) BasicApplication 15) Gds 24) foreign-code
7) CRM 16) Gls 25) generic
8) Cmdline 17) Ipaddress
9) Controller 18) Lvm
Application Type: 10
Consistency check ...
Settings of application type "Crm" (not yet consistent)
1) HELP 6) SystemState2(-)
2) NO-SAVE+EXIT 7) SystemState3(-)
3) - 8) BasicApplication(-)
4) ApplicationName=Crm1 9) Application(-)
5) AdditionalSubApplication
Choose the setting to process: 7
Settings of "SystemState3"
1) HELP 5) SubApplicationsName=Crm_SystemState3
2) NO-SAVE+RETURN 6) AdditionalResource
3) - 7) (ScopeFilter=monaco)
4) REMOVE+RETURN
Choose the setting to process: 6
1) HELP
2) RETURN
3) -
4) lnkexp
Choose the resource: 4
Settings of "SystemState3"
1) HELP 6) AdditionalResource
2) NO-SAVE+RETURN 7) ResourceName[0]=lnkexp
3) SAVE+RETURN 8) Flags[0]=OT1800
4) REMOVE+RETURN 9) Priority[0]=65535
5) SubApplicationsName=Crm_SystemState3
Choose the setting to process: 3
Consistency check ...
Settings of application type "Crm" (consistent)
1) HELP 6) SystemState2(-)
2) NO-SAVE+EXIT 7) SystemState3(Crm_SystemState3)
3) SAVE+EXIT 8) BasicApplication(-)
4) ApplicationName=Crm1 9) Application(-)
5) AdditionalSubApplication
Choose the setting to process: 3
monaco: Main configuration menu, current configuration: symfoPT
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 4
Edit: Application selection menu:
1) HELP
2) QUIT
3) RETURN
4) OPTIONS
5) SYM01STB
6) SYM02STB
Application Name: 4
Edit: selection criteria:
1) HELP 6) ApplicationsOnly
2) RETURN 7) SearchPattern
3) NONE 8) ShowSubApplications
4) ShowTurnkeyWizardsOnly 9) FlagApplications
5) ShowAllAvailableWizards
Set selection criteria: 5
Edit: Application selection menu:
1) HELP 7) Gds_SYM02STB 13) Symfoware_SYM01STB
2) QUIT 8) Lfs_SYM02STB 14) Symfoware_SYM02STB
3) RETURN 9) SYM01 15) sym01stb
4) OPTIONS 10) SYM01CNTL 16) sym02stb
5) Crm1 11) SYM01STB
6) Gds_SYM01STB 12) SYM02STB
Application Name: 16
Consistency check ...
Settings of application type "generic" (consistent)
1) HELP
2) NO-SAVE+EXIT
3) SAVE+EXIT
4) ApplicationName=sym02stb
5) AdditionalMachine
6) AdditionalConsole
7) AdditionalSubApplication
8) Machines[0]=monacoRMS
9) Machines[1]=nurburgRMS
10) SubApplications[0]=Symfoware_SYM02STB
11) (HostSpecificSubApplication=no)
12) (PreCheckScript=)
13) (PreOnlineScript=)
14) (PostOnlineScript=)
15) (PreOfflineScript=)
16) (PostOfflineScript=)
17) (OfflineDoneScript=)
18) (FaultScript=)
19) (AutoStartUp=yes)
20) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
21) (PreserveState=no)
22) (PersistentFault=1)
23) (ShutdownPriority=)
24) (OnlinePriority=1)
25) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
26) (LicenseToKill=no)
27) (AutoBreak=yes)
28) (HaltFlag=yes)
29) (PartialCluster=0)
30) (ScriptTimeout=)
Choose the setting to process: 10
1) HELP 5) Crm1 9) SYM01CNTL
2) RETURN 6) Gds_SYM01STB 10) Symfoware_SYM01STB
3) FREECHOICE 7) Gds_SYM02STB 11) Symfoware_SYM02STB
4) NONE 8) Lfs_SYM02STB
Choose an sub-application to be controlled: 5
Consistency check ...
Settings of application type "generic" (consistent)
1) HELP
2) NO-SAVE+EXIT
3) SAVE+EXIT
4) ApplicationName=sym02stb
5) AdditionalMachine
6) AdditionalConsole
7) AdditionalSubApplication
8) Machines[0]=monacoRMS
9) Machines[1]=nurburgRMS
10) SubApplications[0]=Crm1
11) (HostSpecificSubApplication=no)
12) (PreCheckScript=)
13) (PreOnlineScript=)
14) (PostOnlineScript=)
15) (PreOfflineScript=)
16) (PostOfflineScript=)
17) (OfflineDoneScript=)
18) (FaultScript=)
19) (AutoStartUp=yes)
20) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
21) (PreserveState=no)
22) (PersistentFault=1)
23) (ShutdownPriority=)
24) (OnlinePriority=1)
25) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
26) (LicenseToKill=no)
27) (AutoBreak=yes)
28) (HaltFlag=yes)
29) (PartialCluster=0)
30) (ScriptTimeout=)
Choose the setting to process: 3
Edit: Application selection menu:
1) HELP 7) Gds_SYM02STB 13) Symfoware_SYM01STB
2) QUIT 8) Lfs_SYM02STB 14) Symfoware_SYM02STB
3) RETURN 9) SYM01 15) sym01stb
4) OPTIONS 10) SYM01CNTL 16) sym02stb
5) Crm1 11) SYM01STB
6) Gds_SYM01STB 12) SYM02STB
Application Name: 12
Consistency check ...
Settings of turnkey wizard "SYMFOWARE"
1) HELP
2) READONLY
3) SAVE+EXIT
4) -
5) ApplicationName=SYM02STB
6) Machines+Basics(sym02stb)
7) CommandLines(-)
8) Controllers(-)
9) SYMFOWARE(Symfoware_SYM02STB)
10) LocalFileSystems(Lfs_SYM02STB)
11) RemoteFileSystems(-)
12) IpAddresses(-)
13) RawDisks(-)
14) LVM-VolumeManagement(-)
15) Gds:Global-Disk-Services(Gds_SYM02STB)
16) Gls:Global-Link-Services(-)
Choose the setting to process: 16
Consistency check ...
Yet to do: assign at least a TakeoverIpaddress
Gls (Gls_SYM02STB:not yet consistent)
1) HELP 4) REMOVE+EXIT
2) - 5) AdditionalTakeoverIpaddress
3) SAVE+EXIT 6) (Timeout=60)
Choose the setting to process: 5
1) HELP 5) 10.124.95.163
2) RETURN
3) FREECHOICE
4) 10.124.95.160
Choose a takeover IP address for Gls: 5
Set a flag for takeover IP address: 10.124.95.163
Currently set:
1) HELP 5) AUTORECOVER(A)
2) -
3) SAVE+RETURN
4) DEFAULT
Choose additonally one of the flags: 3
Consistency check ...
Gls (Gls_SYM02STB:consistent)
1) HELP 5) AdditionalTakeoverIpaddress
2) - 6) TakeoverIpaddress[0]=N,10.124.95.163
3) SAVE+EXIT 7) (Timeout=60)
4) REMOVE+EXIT
Choose the setting to process: 3
Consistency check ...
Settings of turnkey wizard "SYMFOWARE"
1) HELP
2) -
3) SAVE+EXIT
4) -
5) ApplicationName=SYM02STB
6) Machines+Basics(sym02stb)
7) CommandLines(-)
8) Controllers(-)
9) SYMFOWARE(Symfoware_SYM02STB)
10) LocalFileSystems(Lfs_SYM02STB)
11) RemoteFileSystems(-)
12) IpAddresses(-)
13) RawDisks(-)
14) LVM-VolumeManagement(-)
15) Gds:Global-Disk-Services(Gds_SYM02STB)
16) Gls:Global-Link-Services(Gls_SYM02STB)
Choose the setting to process: 3
Edit: Application selection menu:
1) HELP 7) Gds_SYM02STB 13) SYM02STB
2) QUIT 8) Gls_SYM02STB 14) Symfoware_SYM01STB
3) RETURN 9) Lfs_SYM02STB 15) Symfoware_SYM02STB
4) OPTIONS 10) SYM01 16) sym01stb
5) Crm1 11) SYM01CNTL 17) sym02stb
6) Gds_SYM01STB 12) SYM01STB
Application Name: 5
Consistency check ...
Settings of application type "Crm" (consistent)
1) HELP 6) SystemState2(-)
2) NO-SAVE+EXIT 7) SystemState3(Crm_SystemState3)
3) SAVE+EXIT 8) BasicApplication(-)
4) ApplicationName=Crm1 9) Application(-)
5) AdditionalSubApplication
Choose the setting to process: 5
1) HELP 5) Gds_SYM01STB 9) SYM01CNTL
2) RETURN 6) Gds_SYM02STB 10) Symfoware_SYM01STB
3) FREECHOICE 7) Gls_SYM02STB 11) Symfoware_SYM02STB
4) Crm1 8) Lfs_SYM02STB
Choose a sub application to be controlled: 11
Consistency check ...
Settings of application type "Crm" (consistent)
1) HELP
2) NO-SAVE+EXIT
3) SAVE+EXIT
4) ApplicationName=Crm1
5) AdditionalSubApplication
6) SubApplications[0]=Symfoware_SYM02STB
7) SystemState2(-)
8) SystemState3(Crm_SystemState3)
9) BasicApplication(-)
10) Application(-)
Choose the setting to process: 3
Edit: Application selection menu:
1) HELP 7) Gds_SYM02STB 13) SYM02STB
2) QUIT 8) Gls_SYM02STB 14) Symfoware_SYM01STB
3) RETURN 9) Lfs_SYM02STB 15) Symfoware_SYM02STB
4) OPTIONS 10) SYM01 16) sym01stb
5) Crm1 11) SYM01CNTL 17) sym02stb
6) Gds_SYM01STB 12) SYM01STB
Application Name: 3
monaco: Main configuration menu, current configuration: symfoPT
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 7
Arranging sub applications topologically ... done.
Check for all applications being consistent ... done.
Running overall consistency check ... done.
Generating pseudo code [one dot per (sub) application]: ............. done.
Generating RMS resources [one dot per resource]: .............................
..............................................................................
........... done
hvbuild using /usr/opt/reliant/build/wizard.d/symfoPT/symfoPT.us
Hit CR to continue
monaco: Main configuration menu, current configuration: symfoPT
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 8
About to activate the configuration symfoPT ...
Testing for RMS to be up somewhere in the cluster ... done.
Arranging sub applications topologically ... done.
Check for all applications being consistent ... done.
Running overall consistency check ... done.
Generating pseudo code [one dot per (sub) application]: ............. done.
Generating RMS resources [one dot per resource]: .............................
..............................................................................
........... done
hvbuild using /usr/opt/reliant/build/wizard.d/symfoPT/symfoPT.us
,nurburgRMS
The new configuration was distributed successfully.
About to put the new configuration in effect ... done.
The activation has finished successfully.
Hit CR to continue
monaco: Main configuration menu, current configuration: symfoPT
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 2
|
