hvw -n pq8config
PQ8-0: Main configuration menu, current configuration: pq8config
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 3
Creation: Application type selection menu:
1) HELP 7) SCALABLE
2) QUIT 8) STANDBY
3) RETURN
4) OPTIONS
5) DEMO
6) GENERIC
Application Type: 8
Consistency check ...
Yet to do: process the basic settings using Machines+Basics
Yet to do: process at least one of the non-basic settings
Settings of turnkey wizard "STANDBY" (APP1:not yet consistent)
1) HELP 4) REMOVE+EXIT
2) NO-SAVE+EXIT 5) ApplicationName=APP1
3) SAVE+EXIT 6) Machines+Basics(-)
Choose the setting to process: 5
1) HELP
2) RETURN
3) FREECHOICE
Enter the name of this turnkey type wizard name: 3
>> LINKEXP
Consistency check ...
Yet to do: process the basic settings using Machines+Basics
Yet to do: process at least one of the non-basic settings
Settings of turnkey wizard "STANDBY" (LINKEXP:not yet consistent)
1) HELP 4) REMOVE+EXIT
2) NO-SAVE+EXIT 5) ApplicationName=LINKEXP
3) SAVE+EXIT 6) Machines+Basics(-)
Choose the setting to process: 6
Consistency check ...
Machines+Basics (linkexp:consistent)
1) HELP 10) (PostOnlineScript=) 19) (OnlinePriority=)
2) - 11) (PreOfflineScript=) 20) (StandbyTransitions=)
3) SAVE+EXIT 12) (OfflineDoneScript=) 21) (LicenseToKill=no)
4) REMOVE+EXIT 13) (FaultScript=) 22) (AutoBreak=yes)
5) AdditionalMachine 14) (AutoStartUp=no) 23) (HaltFlag=no)
6) AdditionalConsole 15) (AutoSwitchOver=No) 24) (PartialCluster=0)
7) Machines[0]=pq8-0RMS 16) (PreserveState=no) 25) (ScriptTimeout=)
8) (PreCheckScript=) 17) (PersistentFault=0)
9) (PreOnlineScript=) 18) (ShutdownPriority=)
Choose the setting to process: 5
1) HELP
2) RETURN
3) pq8-0RMS
4) pq8-1RMS
5) pq8-2RMS
Choose a machine for this application: 5
Consistency check ...
Machines+Basics (linkexp:consistent)
1) HELP 10) (PreOnlineScript=) 19) (ShutdownPriority=)
2) - 11) (PostOnlineScript=) 20) (OnlinePriority=)
3) SAVE+EXIT 12) (PreOfflineScript=) 21) (StandbyTransitions=)
4) REMOVE+EXIT 13) (OfflineDoneScript=) 22) (LicenseToKill=no)
5) AdditionalMachine 14) (FaultScript=) 23) (AutoBreak=yes)
6) AdditionalConsole 15) (AutoStartUp=no) 24) (HaltFlag=no)
7) Machines[0]=pq8-0RMS 16) (AutoSwitchOver=No) 25) (PartialCluster=0)
8) Machines[1]=pq8-2RMS 17) (PreserveState=no) 26) (ScriptTimeout=)
9) (PreCheckScript=) 18) (PersistentFault=0)
Choose the setting to process: 15
1) HELP
2) RETURN
3) yes
4) no
Set the AutoStartUp mode: 3
Consistency check ...
Machines+Basics (linkexp:consistent)
1) HELP 10) (PreOnlineScript=) 19) (ShutdownPriority=)
2) - 11) (PostOnlineScript=) 20) (OnlinePriority=)
3) SAVE+EXIT 12) (PreOfflineScript=) 21) (StandbyTransitions=)
4) REMOVE+EXIT 13) (OfflineDoneScript=) 22) (LicenseToKill=no)
5) AdditionalMachine 14) (FaultScript=) 23) (AutoBreak=yes)
6) AdditionalConsole 15) (AutoStartUp=yes) 24) (HaltFlag=no)
7) Machines[0]=pq8-0RMS 16) (AutoSwitchOver=No) 25) (PartialCluster=0)
8) Machines[1]=pq8-2RMS 17) (PreserveState=no) 26) (ScriptTimeout=)
9) (PreCheckScript=) 18) (PersistentFault=0)
Choose the setting to process: 16
Set flags for AutoSwitchOver: Currently set: NO (N)
1) HELP 4) DEFAULT 7) RESOURCEFAILURE(R)
2) - 5) NO(N) 8) SHUTDOWN(S)
3) SAVE+RETURN 6) HOSTFAILURE(H)
Choose one of the flags: 6
Set flags for AutoSwitchOver: Currently set: HOSTFAILURE (H)
1) HELP 4) DEFAULT 7) RESOURCEFAILURE(R)
2) - 5) NO(N) 8) SHUTDOWN(S)
3) SAVE+RETURN 6) NOT:HOSTFAILURE(H)
Choose one of the flags: 7
Set flags for AutoSwitchOver: Currently set: HOSTFAILURE,RESOURCEFAILURE (HR)
1) HELP 4) DEFAULT 7) NOT:RESOURCEFAILURE(R)
2) - 5) NO(N) 8) SHUTDOWN(S)
3) SAVE+RETURN 6) NOT:HOSTFAILURE(H)
Choose one of the flags: 8
Set flags for AutoSwitchOver: Currently set: HOSTFAILURE,RESOURCEFAILURE,SHUTDOWN (HRS)
1) HELP 4) DEFAULT 7) NOT:RESOURCEFAILURE(R)
2) - 5) NO(N) 8) NOT:SHUTDOWN(S)
3) SAVE+RETURN 6) NOT:HOSTFAILURE(H)
Choose one of the flags: 3
Consistency check ...
Machines+Basics (linkexp:consistent)
1) HELP
2) -
3) SAVE+EXIT
4) REMOVE+EXIT
5) AdditionalMachine
6) AdditionalConsole
7) Machines[0]=pq8-0RMS
8) Machines[1]=pq8-2RMS
9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=0)
19) (ShutdownPriority=)
20) (OnlinePriority=)
21) (StandbyTransitions=)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (HaltFlag=no)
25) (PartialCluster=0)
26) (ScriptTimeout=)
Choose the setting to process: 21
Set flags for StandbyTransitions: Currently set: NO (N)
1) HELP 4) NO(N) 7) SWITCHREQUEST(W)
2) - 5) CLEARFAULTREQUEST(C)
3) SAVE+RETURN 6) STARTUP(T)
Choose one of the flags: 5
Set flags for StandbyTransitions: Currently set: ClearFaultRequst (C)
1) HELP 5) NOT:CLEARFAULTREQUEST(C)
2) - 6) STARTUP(T)
3) SAVE+RETURN 7) SWITCHREQUEST(W)
4) NO(N)
Choose one of the flags: 6
Set flags for StandbyTransitions: Currently set: ClearFaultRequst,StartUp (CT)
1) HELP 5) NOT:CLEARFAULTREQUEST(C)
2) - 6) NOT:STARTUP(T)
3) SAVE+RETURN 7) SWITCHREQUEST(W)
4) NO(N)
Choose one of the flags: 7
Set flags for StandbyTransitions: Currently set: ClearFaultRequst,StartUp,SwitchRequest (CTW)
1) HELP 5) NOT:CLEARFAULTREQUEST(C)
2) - 6) NOT:STARTUP(T)
3) SAVE+RETURN 7) NOT:SWITCHREQUEST(W)
4) NO(N)
Choose one of the flags: 3
Consistency check ...
Machines+Basics (linkexp:consistent)
1) HELP
2) -
3) SAVE+EXIT
4) REMOVE+EXIT
5) AdditionalMachine
6) AdditionalConsole
7) Machines[0]=pq8-0RMS
8) Machines[1]=pq8-2RMS
9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=0)
19) (ShutdownPriority=)
20) (OnlinePriority=)
21) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (HaltFlag=no)
25) (PartialCluster=0)
26) (ScriptTimeout=)
Choose the setting to process: 24
1) HELP
2) RETURN
3) yes
4) no
Set the Halt mode: 3
Consistency check ...
Machines+Basics (linkexp:consistent)
1) HELP
2) -
3) SAVE+EXIT
4) REMOVE+EXIT
5) AdditionalMachine
6) AdditionalConsole
7) Machines[0]=pq8-0RMS
8) Machines[1]=pq8-2RMS
9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=0)
19) (ShutdownPriority=)
20) (OnlinePriority=)
21) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (HaltFlag=yes)
25) (PartialCluster=0)
26) (ScriptTimeout=)
Choose the setting to process: 3
Consistency check ...
Yet to do: process at least one of the non-basic settings
Settings of turnkey wizard "STANDBY" (LINKEXP:not yet consistent)
1) HELP 9) Procedure:BasicApplication(-)
2) - 10) Symfoware(-)
3) SAVE+EXIT 11) Procedure:SystemState3(-)
4) - 12) Procedure:SystemState2(-)
5) ApplicationName=LINKEXP 13) Gls:Global-Link-Services(-)
6) Machines+Basics(linkexp) 14) LocalFileSystems(-)
7) CommandLines(-) 15) Gds:Global-Disk-Services(-)
8) Procedure:Application(-)
Choose the setting to process: 13
Consistency check ...
Yet to do: assign at least a TakeoverIpaddress
Gls (Gls_LINKEXP:not yet consistent)
1) HELP 4) REMOVE+EXIT
2) - 5) AdditionalTakeoverIpaddress
3) SAVE+EXIT 6) (Timeout=60)
Choose the setting to process: 5
1) HELP 6) 10.124.22.17
2) RETURN 7) 10.124.22.18
3) FREECHOICE 8) 10.124.22.22
4) 10.124.22.19 9) 10.124.22.20
5) 10.124.22.16
Choose a takeover IP address for Gls: 8
Set a flag for takeover IP address: 10.124.22.22
Currently set:
1) HELP 5) AUTORECOVER(A)
2) -
3) SAVE+RETURN
4) DEFAULT
Choose additonally one of the flags: 3
Consistency check ...
Gls (Gls_LINKEXP:consistent)
1) HELP 5) AdditionalTakeoverIpaddress
2) - 6) TakeoverIpaddress[0]=N,10.124.22.22
3) SAVE+EXIT 7) (Timeout=60)
4) REMOVE+EXIT
Choose the setting to process: 3
Consistency check ...
Settings of turnkey wizard "STANDBY" (LINKEXP:consistent)
1) HELP
2) -
3) SAVE+EXIT
4) -
5) ApplicationName=LINKEXP
6) Machines+Basics(linkexp)
7) CommandLines(-)
8) Procedure:Application(-)
9) Procedure:BasicApplication(-)
10) Symfoware(-)
11) Procedure:SystemState3(-)
12) Procedure:SystemState2(-)
13) Gls:Global-Link-Services(Gls_LINKEXP)
14) LocalFileSystems(-)
15) Gds:Global-Disk-Services(-)
Choose the setting to process: 15
Consistency check ...
Yet to do: assign at least one disk class
Volume management (Gds_LINKEXP:not yet consistent)
1) HELP 4) REMOVE+EXIT 7) (StandbySupport=no)
2) - 5) AdditionalDiskClass 8) (AutoRecover=no)
3) SAVE+EXIT 6) (ClassNameFilter=) 9) (Timeout=1800)
Choose the setting to process: 5
1) HELP 6) class0001 11) class0008
2) RETURN 7) class0002 12) gds1
3) FREECHOICE 8) class0005
4) linkexp 9) class0006
5) class0004 10) mw
Choose the disk class: 4
Set a flag for the disk class: linkexp
Currently set:
1) HELP 5) MONITORONLY(M)
2) -
3) SAVE+RETURN
4) DEFAULT
Choose additionally one of the flags: 3
Consistency check ...
Volume management (Gds_LINKEXP:consistent)
1) HELP 6) DiskClasses[0]=linkexp
2) - 7) (ClassNameFilter=)
3) SAVE+EXIT 8) (StandbySupport=no)
4) REMOVE+EXIT 9) (AutoRecover=no)
5) AdditionalDiskClass 10) (Timeout=1800)
Choose the setting to process: 3
Consistency check ...
Settings of turnkey wizard "STANDBY" (LINKEXP:consistent)
1) HELP
2) -
3) SAVE+EXIT
4) -
5) ApplicationName=LINKEXP
6) Machines+Basics(linkexp)
7) CommandLines(-)
8) Procedure:Application(-)
9) Procedure:BasicApplication(-)
10) Symfoware(-)
11) Procedure:SystemState3(-)
12) Procedure:SystemState2(-)
13) Gls:Global-Link-Services(Gls_LINKEXP)
14) LocalFileSystems(-)
15) Gds:Global-Disk-Services(Gds_LINKEXP)
Choose the setting to process: 14
Consistency check ...
Yet to do: assign at least one mount point
File systems (Lfs_LINKEXP:not yet consistent)
1) HELP 4) REMOVE+EXIT 7) (Timeout=180)
2) - 5) AdditionalMountPoint
3) SAVE+EXIT 6) (Filter=)
Choose the setting to process: 5
1) HELP 5) /mnt/CMGR
2) RETURN 6) /mnt/SSQC
3) FREECHOICE 7) /mnt/linkexp01
4) ALL
Choose a mount point: 7
Set flags for mount point: /mnt/linkexp01 Currently set: LOCAL,AUTORECOVER (LA)
1) HELP 4) DEFAULT 7) SHARE(S)
2) - 5) SYNC(Y) 8) MONITORONLY(M)
3) SAVE+RETURN 6) NOT:AUTORECOVER(A)
Choose one of the flags: 3
Consistency check ...
File systems (Lfs_LINKEXP:consistent)
1) HELP 5) AdditionalMountPoint
2) - 6) MountPoints[0]=LA:/mnt/linkexp01
3) SAVE+EXIT 7) (Filter=)
4) REMOVE+EXIT 8) (Timeout=180)
Choose the setting to process: 3
Consistency check ...
Settings of turnkey wizard "STANDBY" (LINKEXP:consistent)
1) HELP
2) -
3) SAVE+EXIT
4) -
5) ApplicationName=LINKEXP
6) Machines+Basics(linkexp)
7) CommandLines(-)
8) Procedure:Application(-)
9) Procedure:BasicApplication(-)
10) Symfoware(-)
11) Procedure:SystemState3(-)
12) Procedure:SystemState2(-)
13) Gls:Global-Link-Services(Gls_LINKEXP)
14) LocalFileSystems(Lfs_LINKEXP)
15) Gds:Global-Disk-Services(Gds_LINKEXP)
Choose the setting to process: 3
PQ8-0: Main configuration menu, current configuration: pq8config
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 7
Arranging sub applications topologically ... done.
Check for all applications being consistent ... done.
Running overall consistency check ... done.
Generating pseudo code [one dot per (sub) application]: ............................. done.
Generating RMS resources [one dot per resource]: ..................................................
...................................................................................................
...................................................................................................
.................................................. done
hvbuild using /usr/opt/reliant/build/wizard.d/pq8config/pq8config.us
Hit CR to continue
PQ8-0: Main configuration menu, current configuration: pq8config
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 8
About to activate the configuration pq8config ...
Testing for RMS to be up somewhere in the cluster ... done.
Arranging sub applications topologically ... done.
Check for all applications being consistent ... done.
Running overall consistency check ... done.
Generating pseudo code [one dot per (sub) application]: ............................. done.
Generating RMS resources [one dot per resource]: ..................................................
...................................................................................................
...................................................................................................
.................................................. done
hvbuild using /usr/opt/reliant/build/wizard.d/pq8config/pq8config.us
About to distribute the new configuration data to hosts: pq8-0RMS,pq8-1RMS,pq8-2RMS
The new configuration was distributed successfully.
About to put the new configuration in effect ... done.
The activation has finished successfully.
Hit CR to continue
PQ8-0: Main configuration menu, current configuration: pq8config
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 2
|
