hvw -n link2
hstcll01: Main configuration menu, current configuration: link2
1) HELP 10) Configuration-Freeze
2) QUIT 11) Configuration-Thaw
3) Application-Create 12) Configuration-Edit-Global-Settings
4) Application-Edit 13) Configuration-Consistency-Report
5) Application-Remove 14) Configuration-ScriptExecution
6) Configuration-Generate 15) RMS-CreateMachine
7) Configuration-Activate 16) RMS-RemoveMachine
8) Configuration-Copy 17) SwitchToRuntimeMode
9) Configuration-Remove
Choose an action: 3
Creation: Application type selection menu:
1) HELP
2) QUIT
3) RETURN
4) OPTIONS
5) CRM
6) GENERIC
Application Type: 4
Creation: Set menu options:
1) ShowAllAvailableWizards
2) ShowTurnKeyWizardsOnly
Application Type: 1
Creation: Application type selection menu:
1) HELP 8) Cmdline 15) Ipaddress
2) QUIT 9) Controller 16) Lvm
3) RETURN 10) Crm 17) Rawdisk
4) OPTIONS 11) Fsystem 18) SystemState2
5) Application 12) GENERIC 19) SystemState3
6) BasicApplication 13) Gds 20) foreign-code
7) CRM 14) Gls 21) generic
Application Type: 10
Consistency check ...
Settings of application type "Crm" (not yet consistent)
1) HELP 6) SystemState2(-)
2) NO-SAVE+EXIT 7) SystemState3(-)
3) - 8) BasicApplication(-)
4) ApplicationName=Crm1 9) Application(-)
5) AdditionalSubApplication
Choose the setting to process: 7
Settings of "SystemState3"
1) HELP 5) SubApplicationsName=Crm_SystemState3
2) NO-SAVE+RETURN 6) AdditionalResource
3) - 7) (ScopeFilter=hstcll01)
4) REMOVE+RETURN
Choose the setting to process: 6
1) HELP
2) RETURN
3) -
4) lnkexp
Choose the resource: 4
Settings of "SystemState3"
1) HELP 6) AdditionalResource
2) NO-SAVE+RETURN 7) ResourceName[0]=lnkexp
3) SAVE+RETURN 8) Flags[0]=OT1800
4) REMOVE+RETURN 9) Priority[0]=65535
5) SubApplicationsName=Crm_SystemState3
Choose the setting to process: 3
Consistency check ...
Settings of application type "Crm" (consistent)
1) HELP 6) SystemState2(-)
2) NO-SAVE+EXIT 7) SystemState3(Crm_SystemState3)
3) SAVE+EXIT 8) BasicApplication(-)
4) ApplicationName=Crm1 9) Application(-)
5) AdditionalSubApplication
Choose the setting to process: 3
hstcll01: Main configuration menu, current configuration: link2
No RMS active in the cluster
1) HELP 10) Configuration-Remove
2) QUIT 11) Configuration-Freeze
3) Application-Create 12) Configuration-Thaw
4) Application-Edit 13) Configuration-Edit-Global-Settings
5) Application-Remove 14) Configuration-Consistency-Report
6) Application-Clone 15) Configuration-ScriptExecution
7) Configuration-Generate 16) RMS-CreateMachine
8) Configuration-Activate 17) RMS-RemoveMachine
9) Configuration-Copy
Choose an action: 4
Edit: Application selection menu (restricted):
1) HELP
2) QUIT
3) RETURN
4) OPTIONS
5) SYMFOAPP01STB
Application Name: 4
Edit: selection criteria:
1) HELP 6) ApplicationsOnly
2) RETURN 7) SearchPattern
3) NONE 8) ShowSubApplications
4) ShowTurnkeyWizardsOnly 9) FlagApplications
5) ShowAllAvailableWizards
Set selection criteria: 5
Edit: Application selection menu:
1) HELP 7) Lfs_SYMFOAPP01STB
2) QUIT 8) Symfoware_SYMFOAPP01STB
3) RETURN 9) SYMFOAPP01
4) OPTIONS 10) SYMFOAPP01CNTL
5) Crm1 11) SYMFOAPP01STB
6) Gls_SYMFOAPP01STB 12) symfoapp01stb
Application Name: 12
Settings of application type "generic" (consistent)
1) HELP
2) NO-SAVE+EXIT
3) SAVE+EXIT
4) ApplicationName=symfoapp01stb
5) AdditionalMachine
6) AdditionalConsole
7) AdditionalSubApplication
8) Machines[0]=rx300-1RMS
9) Machines[1]=rx300-2RMS
10) SubApplications[0]=Symfoware_SYMFOAPP01STB
11) (HostSpecificSubApplication=no)
12) (PreCheckScript=)
13) (PreOnlineScript=)
14) (PostOnlineScript=)
15) (PreOfflineScript=)
16) (PostOfflineScript=)
17) (OfflineDoneScript=)
18) (FaultScript=)
19) (AutoStartUp=no)
20) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
21) (PreserveState=no)
22) (PersistentFault=1)
23) (ShutdownPriority=)
24) (OnlinePriority=1)
25) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
26) (LicenseToKill=no)
27) (AutoBreak=yes)
28) (HaltFlag=yes)
29) (PartialCluster=0)
30) (ScriptTimeout=)
Choose the setting to process: 10
1) HELP 4) NONE 7) Lfs_SYMFOAPP01STB
2) RETURN 5) Crm1 8) Symfoware_SYMFOAPP01STB
3) FREECHOICE 6) Gls_SYMFOAPP01STB 9) SYMFOAPP01CNTL
Choose an sub-application to be controlled: 5
Settings of application type "generic" (consistent)
1) HELP
2) NO-SAVE+EXIT
3) SAVE+EXIT
4) ApplicationName=symfoapp01stb
5) AdditionalMachine
6) AdditionalConsole
7) AdditionalSubApplication
8) Machines[0]=rx300-1RMS
9) Machines[1]=rx300-2RMS
10) SubApplications[0]=Crm1
11) (HostSpecificSubApplication=no)
12) (PreCheckScript=)
13) (PreOnlineScript=)
14) (PostOnlineScript=)
15) (PreOfflineScript=)
16) (PostOfflineScript=)
17) (OfflineDoneScript=)
18) (FaultScript=)
19) (AutoStartUp=no)
20) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
21) (PreserveState=no)
22) (PersistentFault=1)
23) (ShutdownPriority=)
24) (OnlinePriority=1)
25) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
26) (LicenseToKill=no)
27) (AutoBreak=yes)
28) (HaltFlag=yes)
29) (PartialCluster=0)
30) (ScriptTimeout=)
Choose the setting to process: 3
Edit: Application selection menu:
1) HELP 7) Lfs_SYMFOAPP01STB
2) QUIT 8) Symfoware_SYMFOAPP01STB
3) RETURN 9) SYMFOAPP01
4) OPTIONS 10) SYMFOAPP01CNTL
5) Crm1 11) SYMFOAPP01STB
6) Gls_SYMFOAPP01STB 12) symfoapp01stb
Application Name: 5
Settings of application type "Crm" (consistent)
1) HELP 6) SystemState2(-)
2) NO-SAVE+EXIT 7) SystemState3(Crm_SystemState3)
3) SAVE+EXIT 8) BasicApplication(-)
4) ApplicationName=Crm1 9) Application(-)
5) AdditionalSubApplication
Choose the setting to process: 5
1) HELP 4) Crm1 7) Symfoware_SYMFOAPP01STB
2) RETURN 5) Gls_SYMFOAPP01STB 8) SYMFOAPP01CNTL
3) FREECHOICE 6) Lfs_SYMFOAPP01STB
Choose a sub application to be controlled: 7
Settings of application type "Crm" (consistent)
1) HELP
2) NO-SAVE+EXIT
3) SAVE+EXIT
4) ApplicationName=Crm1
5) AdditionalSubApplication
6) SubApplications[0]=Symfoware_SYMFOAPP01STB
7) SystemState2(-)
8) SystemState3(Crm_SystemState3)
9) BasicApplication(-)
10) Application(-)
Choose the setting to process: 3
hstcll01: Main configuration menu, current configuration: config
1) HELP 10) Configuration-Freeze
2) QUIT 11) Configuration-Thaw
3) Application-Create 12) Configuration-Edit-Global-Settings
4) Application-Edit 13) Configuration-Consistency-Report
5) Application-Remove 14) Configuration-ScriptExecution
6) Configuration-Generate 15) RMS-CreateMachine
7) Configuration-Activate 16) RMS-RemoveMachine
8) Configuration-Copy 17) SwitchToRuntimeMode
9) Configuration-Remove
Choose an action: 6
Arranging sub applications topologically ... done.
Check for all applications being consistent ... done.
Running overall consistency check ... done.
Generating pseudo code [one dot per (sub) application]: ...... done
Generating RMS resources [one dot per resource]: ............................................... done
hvbuild using /usr/opt/reliant/build/wizard.d/config/config.us
Hit CR to continue
hstcll01: Main configuration menu, current configuration: config
1) HELP 10) Configuration-Freeze
2) QUIT 11) Configuration-Thaw
3) Application-Create 12) Configuration-Edit-Global-Settings
4) Application-Edit 13) Configuration-Consistency-Report
5) Application-Remove 14) Configuration-ScriptExecution
6) Configuration-Generate 15) RMS-CreateMachine
7) Configuration-Activate 16) RMS-RemoveMachine
8) Configuration-Copy 17) SwitchToRuntimeMode
9) Configuration-Remove
Choose an action: 7
About to activate the configuration config ...
Testing for RMS to be up somewhere in the cluster for 10s...... done
Arranging sub applications topologically ... done.
Check for all applications being consistent ... done.
Running overall consistency check ... done.
Generating pseudo code [one dot per (sub) application]: ...... done
Generating RMS resources [one dot per resource]: ............................................... done
hvbuild using /usr/opt/reliant/build/wizard.d/config/config.us
About to distribute the new configuration data to hosts: hstcll01RMS,hstcll02RMS
The new configuration was distributed successfully.
About to put the new configuration in effect ... done.
To activate the new configuration restart RMS.
Hit CR to continue
hstcll01: Main configuration menu, current configuration: config
1) HELP 10) Configuration-Freeze
2) QUIT 11) Configuration-Thaw
3) Application-Create 12) Configuration-Edit-Global-Settings
4) Application-Edit 13) Configuration-Consistency-Report
5) Application-Remove 14) Configuration-ScriptExecution
6) Configuration-Generate 15) RMS-CreateMachine
7) Configuration-Activate 16) RMS-RemoveMachine
8) Configuration-Copy 17) SwitchToRuntimeMode
9) Configuration-Remove
Choose an action: 2
|
