Dynamic Reconfiguration User's Guide I/O device edition - for Solaris (TM) Operating System -

1.2 PCI cards for network devices

The following list describes the PCI cards that support DR for network devices (at the time of December 2005).
When using below PCI cards, please refer to "5.1.8 Network driver configuration changing". Please ask FUJITSU sales division about the newest information of cards that support DR.

Functions	Product ID (Functions)	Software of driver (driver name)	Supporting Functions			Redundant Software (*13)
			Hot replacement		Hot expansion
			Non kernel memory board	Kernel memory board (*1)
Ethernet	X1033A-U X1033A-X and Onboard LAN interface (*2) (10/100BASE-T)	Solaris (hme)	OK	OK	OK	*SynfinityLink 2.2 *PRIMECLUSTER GLS 4.0 or later
	X1034A-X (10/100BASE-T x4)	Solaris (qfe)	NG	NG	NG	*SynfinityLink 2.2 *PRIMECLUSTER GLS 4.0 or later
	PW008FE1 (10/100BASE-T)	FUJITSU PCI 10/100 Ethernet 1.0 or later (supplied with a PCI card) (*3)	OK	OK	OK	*SynfinityLink 2.2 (*4) *PRIMECLUSTER GLS 4.0 or later (*5)
	PW008QE1 (10/100BASE-T x4)	FUJITSU PCI Quad 10/100 Ethernet 1.0 or later (supplied with a PCI card) (*6) (*14) (*15) (*16)	OK	OK	OK	*SynfinityLink 2.2 (*4) *PRIMECLUSTER GLS 4.0 or later (*5)
	PW008QE2 (10/100BASE-T x4)	FUJITSU PCI Quad 10/100 Ethernet 1.1 or later (supplied with a PCI card) (*12) (*14) (*15) (*16)	OK	OK	OK	*SynfinityLink 2.2 (*4) *PRIMECLUSTER GLS 4.0 or later (*5)
	PP028GE1U PP028GE1X (1000BASE-SX)	FUJITSU PCI Gigabit Ethernet 1.4.1 or later (supplied with a PCI card) (*7)	OK	OK	OK	*SynfinityLink 2.2 *PRIMECLUSTER GLS 4.0 or later
	PW008GE1U PW008GE1X (1000BASE-T)	FUJITSU PCI Gigabit Ethernet 1.4.1 or later (supplied with a PCI card) (*7)	OK	OK	OK	*SynfinityLink 2.2 *PRIMECLUSTER GLS 4.0 or later
	PW008GE4 (1000BASE-SX)	FUJITSU PCI Gigabit Ethernet 2.0 or later (supplied with a PCI card) (*8) (*9)	OK	OK	OK	*SynfinityLink 2.2 (*4) *PRIMECLUSTER GLS 4.0 or later (*5)
	PW008GE5 (10/100/1000BASE-T)	FUJITSU PCI Gigabit Ethernet 2.0 or later (supplied with a PCI card) (*8) (*9)	OK	OK	OK	SynfinityLink 2.2 (*4) PRIMECLUSTER GLS 4.0 or later (*5)
	PW008QG1 (10/100/1000Base-T x4)	FUJITSU PCI Gigabit Ethernet 2.3 or later (supplied with a PCI card) (*14) (*15) (*16)	OK	OK	OK	SynfinityLink 2.2 (*4) PRIMECLUSTER GLS 4.0 or later(*5)
ATM	GP7B8AT1U GP7B8AT1X (ATM)	FUJITSU PCI ATM 1.2 or later (supplied with a PCI card) (*14)	OK	OK	NG (*10)	*SynfinityLink 2.2 *PRIMECLUSTER GLS 4.0 or later
InfiniBand(*11)	PW028SY1	BLASTBAND 1.0 or later	OK	OK	OK	*PRIMECLUSTER GLS 4.1A20 or later

(*1) The replacement of the kernel memory board is not supporting on the redundant system which used the SynfinityLink 2.2 and the PRIMECLUSTER GLS 4.0.

(*2) The below machines have an Onboard LAN interface (hme).
- PRIMEPOWER 800/1000/2000, 900/1500/2500

(*3) Patch 912785-05 or later is needed.

(*4) The replacement and expansion are supported only on the Redundant Line Control Function.

(*5) When using the PRIMECLUSTER GLS 4.0 Multipath Function, patch 911872-03 or later is needed.

(*6) When using the "FUJITSU PCI Quad 10/100 Ethernet 1.0," patch 912216-09 or later is needed.

(*7) The driver version 1.4.1 or later and the patch 912214-03 or later are needed.

(*8) When using Solaris 8, the patch 114536-03 or later is needed.
When applying the patch 114536-03 or later, if the patch 912314-01 or later has applied, it is necessary to remove the patch. When removing the patch 912314-01 or 912314-02, the /platform/sun4us/kernel/drv/fjgi.conf file, which defines fjgi interface settings, will be replaced. If you have edited fjgi.conf, please make a backup copy of fjgi.conf beforehand and pick up your own settings and add them to the new one after removing the patch if necessary.

(*9) When using Solaris 9, the patch 114994-03 or later is needed.
When applying the patch 114994-03 or later, if the patch 912660-01 or later has applied, it is necessary to remove the patch. When removing the patch 912660-01 or 912660-02, the /platform/sun4us/kernel/drv/fjgi.conf file, which defines fjgi interface settings, will be replaced. If you have edited fjgi.conf, please make a backup copy of fjgi.conf beforehand and pick up your own settings and add them to the new one after removing the patch if necessary.

(*10) System rebooting is needed for hot expansion.

(*11) When PCI card is InfiniBand, please refer to "BLASTBAND GUIDE" for the procedure for replacement and expansion.

(*12) Patch 913294-03 or later is needed.

(*13) PRIMECLUSTER GLS 4.1A40 or later is necessary for Solaris 10.

(*14) 912680-04 or later is necessary, if Enhanced Support Facility 2.3 is used on Solaris 9.

(*15) 913371-01 or later is necessary, if Enhanced Support Facility 2.4 or 2.4.1 is used on Solaris 9.

(*16) 913732-02 or later is necessary, if Enhanced Support Facility 2.5 or 2.5.1 is used on Solaris 9.