Dynamic Reconfiguration User's Guide I/O device edition - for Solaris (TM) Operating System -

1.1 PCI cards for file devices

The following list describes the PCI cards that support DR for file devices (at the time of December 2005).
Please ask FUJITSU sales division about the newest information of cards that support DR.

Functions	Product ID	Software of driver (driver name)	Supporting Functions			Redundant Software
			Hot replacement		Hot expansion
			Non kernel memory board	Kernel memory board
SCSI	X6540A-U	Solaris (glm)	NG (*1)	NG (*1)	NG (*1)	None
	X6541A-U X6541A-X	Solaris (glm) (*2)	NG (*3)	NG (*3)	OK (*15)	*Multipath Disk Control 2.1 or later (*4)(*5)(*6) (*17) *Multipath Disk Control load balance option 2.1 or later (*6)(*7)(*8) *GR Multipath Driver 1.0.1 or later(*17) (*18)
	GP7B8SC1U GP7B8SC1X	Solaris (glm) (*2)	OK (*16)	OK (*16)	OK	*Multipath Disk Control 2.1 or later (*4)(*5)(*6) (*17) *Multipath Disk Control load balance option 2.1 or later (*6)(*7)(*8) *GR Multipath Driver 1.0.1 or later(*17) (*18)
	PP028SC1U PP028SC1X	FUJITSU PCI SCSI Adapter Driver 1.0 or later (enclosed with a PCI card)	OK	OK	OK	None
	PW008SC3 PW0G8SC1	Solaris (fjulsa) (*9)(*10)	NG (*3)	NG (*3)	OK (*15)	None
		FUJITSU ULTRA LVD SCSI Host Bus Adapter Driver 1.0 or later (enclosed with a PCI card) (*9)(*10)	NG (*3)	NG (*3)	OK (*15)	None
Fibre Channel	GP7B8FC1U	FUJITSU PCI Fibre Channel 2.2 or later (enclosed with a PCI card) (*11)(*12) (*13)	OK	OK	OK	*Multipath Disk Control 2.1 or later (*4)(*5)(*6) (*17) *Multipath Disk Control load balance option 2.1 or later (*6)(*7)(*8) *GR Multipath Driver 1.0.1 or later(*17) (*18) *ETERNUS Multipath Driver 2.0.1 or later(*17)
	PW008FC2U	FUJITSU PCI Fibre Channel 2.2.1 or later (enclosed with a PCI card) (*12) (*13)	OK	OK	OK	*Multipath Disk Control 2.1 or later (*4)(*5)(*6) (*16) *Multipath Disk Control load balance option 2.1 or later (*6)(*7)(*8) *GR Multipath Driver 1.0.1 or later (*17) (*18) *ETERNUS Multipath Driver 2.0.1 or later(*17)
	PW008FC3U	FUJITSU PCI Fibre Channel 2.2.1 Update2 or later (enclosed with a PCI card) (*13)	OK	OK	OK	*Multipath Disk Control 2.1 or later (*4)(*5)(*6) (*17) *Multipath Disk Control load balance option 2.1 or later (*6)(*7)(*8) *GR Multipath Driver 1.0.1 or later (*17) (*18) *ETERNUS Multipath Driver 2.0.1 or later(*17)
	PW028FC3 PW028FC3U	Emulex LightPulse FC SCSI/IP Host Bus Adapter driver 6.02f or later (*14)	OK (*19)	OK (*19)	OK (*19)	(*20)
	PW028FC4S PW028FC4U	Emulex LightPulse FC SCSI/IP Host Bus Adapter driver 6.02f or later (*14)	OK (*19)	OK (*19)	OK (*19)	(*20)
	PW028FC5S PW028FC5U	Emulex LightPulse FC SCSI/IP Host Bus Adapter driver 6.02f or later (*14)	OK (*19)	OK (*19)	OK (*19)	(*20)

(*1) Replacement and expansion are not supported due to hardware specifications.

(*2) In case of using Solaris 8, patch 109885-09 or later is needed.

(*3) Replacement is not supported due to hardware specifications.

(*4) In case of using Solaris 9, Multipath Disk Control 2.2.1 or later is needed.

(*5) In case of using Multipath Disk Control 2.1, patches 911012-10 or later (MPHD) and 911013-12 or later (HDDV) are needed.
And in case of using Multipath Disk Control 2.2, patches 911258-03 or later (MPHD) and 911886-08 or later (HDDV) are needed.
Moreover in case of using Multipath Disk Control 2.2.1, patches 912629-02 or later (MPHD) and 910989-07 or later (HDDV) are needed.

(*6) Multipath Disk Control and load balance option 2.2 are needed to hot expansion.

(*7) Multipath Disk Control load balance option is not supporting Solaris 9 or later.

(*8) In case of using Multipath Disk Control load balance option 2.1, patch 910990-01 or later is needed.

(*9) When using Solaris 8, the patch 114632-04 or later is needed.
When applying the patch 114632-04 or later, if the patch 912773-02 or later has applied, it is necessary to remove the patch.

(*10) When using Solaris 9, the patch 114951-03 or later is needed.
When applying the patch 114951-03 or later, if the patch 912774-01 or later has applied, it is necessary to remove the patch.

(*11) In case of using Solaris 9, FUJITSU PCI Fibre Channel 2.2 (patchlevel 08) or later is needed.

(*12) In case of using FUJITSU PCI Fibre Channel 2.2, patch 910936-13 or later is needed. And in case of using FUJITSU PCI Fibre Channel 2.2.1, patch 912069-09 or later is needed.

(*13) In case of using Solaris 10, FUJITSU PCI Fibre Channel 3.0 or later is needed.

(*14) Firmware version 1.91a1 or later and Fcode version 1.41a4 or later are required.

(*15) When connecting a shared device with a cluster system, please attach the system board after connecting the PCI card and the shared device with each node of the cluster system.

(*16) When a shared device of non-multipath configuration is connected with a cluster system, it is necessary to stop the use of the shared device from the active node of the cluster system.

(*17) Solaris 10 is supported only on ETERNUS Multipath driver.

(*18) In case of using GR Multipath Driver 1.0.1 or later, patch 912651-11 or later is needed.

(*19) DR is not permitted with fcode boot (SAN boot) environment.

(*20) Please confirm support version from product vendor.