###### is still referenced.
Another DR is executed.
Bad address: dr@0:SBX::memory
Board is already connected.
Cannot determine property length: PROM Node 0xX: property fma-ranges.
Cannot determine property length: PROM Node 0xX: property address in fjsv_cdr_get_tod_address.
Cannot determine property length: PROM Node 0xX: property components in fjsv_cdr_get_tod_address.
Cannot determine property length: SBX::Y: property Z
Cannot find TOD FJSV,eeprom in fjsv_cdr_get_tod_address.
Cannot proceed; Board is configured or busy: SBX
Cannot read property value: PROM Node #: property name
Cannot read property value: PROM Node 0xX: property address in fjsv_cdr_get_tod_address.
Cannot read property value: PROM Node 0xX: property components in fjsv_cdr_get_tod_address.
Cannot read property value: PROM Node 0xX: property dr-status
Cannot read property value: PROM Node 0xX: property fma-ranges.
Cannot read property value: property: name
Cannot read property value: property: scf-cmd-reg.
Cannot read property value: SBX::Y: property ######
Connection Script returns illegal exit code. (Exit code=#)
Device busy: dr@0:SBX::cpuY
Device busy: dr@0:SBX::pciY
Device driver failure: path
Device failed to resume: <device name>@<device info>
Device failed to resume: <driver name|major #> ...
Device failed to suspend: <device name>@<device info>
Device failed to suspend: <driver name|major #> ...
Device in fatal state
DR is not enabled.
DR operation is not executed.
dr_move_memory: failed to quiesce OS for copy-rename
drc: Another drc is executed.
drc: Board Type is different (sbXY).
drc: Board Type is different (sbXY-N).
drc: cannot open /dev/FJSVhwr/pwrctl2: システムコールエラーメッセージ
drc: CPU clock frequency is different (sbXY).
drc: CPU clock frequency is different (sbXY-N).
drc: DR is not enabled.
drc: DR is not supported.
drc: dr module is not found.
drc: dr module terminated abnormally(X).
drc: Incorrect memory mode (sbXY).
drc: Incorrect memory mode (sbXY-N).
drc: Incorrect PID.
drc: Invalid Status XX YY
drc: ioctl() failed: システムコールエラーメッセージ
drc: not super user
drc: Specified system board is not installed (sbXY).
drc: Specified system board is not installed (sbXY-N).
drc: System board is in use by another partition (sbXY).
drc: System board is in use by another partition (sbXY-N).
drc: System call failed.
drc: Time Out
drc: Unable to connect the specified system board (sbXY).
drc: Unable to connect the specified system board (sbXY-N).
drc: Unable to disconnect the specified system board (sbXY incorrect PID).
drc: Unable to disconnect the specified system board (sbXY-N incorrect PID).
drc: Unable to disconnect the specified system board (sbXY incorrect status).
drc: Unable to disconnect the specified system board (sbXY-N incorrect status).
drc: Unable to disconnect the specified system board (sbXY last system board).
drc: Unable to disconnect the specified system board (sbXY-N last system board).
drcstat: /dev/openprom ioctl() failed :X: system call error message
drcstat: cannot open /dev/FJSVhwr/pwrctl2: system call error Message
drcstat: DR is not supported.
drcstat: dr module is not found.
drcstat: dr_info terminated abnormally(X).
drcstat: ioctl() failed: system call error message
drcstat: malloc() failed.
drcstat: not super user
drcstat: Specified system board does not exist in current partition.
drcstat: Specified system board is not installed.
drcstat: System call failed.
drmach parameter is inappropriate for operation
drmach parameter is not a valid ID
error #:
error #: #
Error occurred on executing #### (Exit code=#)
Fail to assign the board.
Fail to cancel releasing the memory.
Fail to check the bound processes.
Fail to configure the board.
Fail to configure the CPU.
Fail to configure the I/O.
Fail to configure the memory.
Fail to delete the processor group.
Fail to disconnect the board.
Fail to execute cfgadm ###### I/O Device=######.
Fail to get the status of the board.
Fail to offline the CPU. [processor_id=#]
Fail to online the CPU. [processor_id=#]
Fail to release the board
Fail to release the CPU.
Fail to release the I/O.
Fail to release the memory.
Fail to remove processor from processor group.
Fail to stop drd.
Fail to stop picld.
Fail to unassign the board.
Fail to unbind processes.
Fail to unconfigure the board.
Fail to unconfigure the CPU.
Fail to unconfigure the I/O.
Fail to unconfigure the memory.
Failed to off-line: dr@0:SBX::cpuY
Failed to on-line: dr@0:SBX::cpuY
Failed to start CPU: dr@0:SBX::cpuY
Failed to stop CPU: dr@0:SBX::cpuY
failed to stop kernel thd: <name of thread>
Fail to restart picld.
Failed to resume device <device name>@<device info>
Failed to suspend device <device name>@<device info>
Firmware cannot find node.: node name /FJSV,system
Firmware cannot find node.: node name /FJSV,system/board@#
Firmware cannot find node.: <devicename or todname> in fjsv_cdr_get_tod_address
Firmware deprobe failed:
Firmware deprobe failed: SBX::cpuY
Firmware probe failed: SBX
Getproplen returns wrong size.: PROM Node 0xX: property address in fjsv_cdr_get_tod_address. Expected #, got #.
I/O error: dr@0:SBX::memory
Illegal environment for DR. (ftrace_atboot is set to 1.)
Insufficient memory: dr@0:SBX::cpuY
Insufficient memory: dr@0:SBX::memory
Internal error: dr@0:SBX::memory
Internal error: dr.c #
Internal error: dr_mem.c #
Invalid argument
Invalid argument: ########
Invalid argument: dr@0:SBX::cpuY
Invalid argument: dr@0:SBX::memory
Invalid board number: X
Invalid state transition
Invalid state transition: dr@0:SBX::cpuY
Invalid state transition: dr@0:SBX::memory
Invalid state transition: dr@0:SBX::pciY
Invalid Status Devices=#### Status=####
Kernel cage is disabled: dr@0:SB#::memory
Kernel memory is on the target board.
kmem_alloc failed: in fjsv_cdr_get_tod_address.
Memory is not enough to detach the board.
Memory operation cancelled: dr@0:SBX::memory
Memory operation failed: dr@0:SBX::memory
Memory operation refused: dr@0:SBX::memory
No available memory target: dr@0:SBX::memory
No device(s) on board: dr@0:SBX
No error
no error: dr@0:SBX::memory
No such device: dr@0:SBX::cpuY
Non-relocatable pages in span: dr@0:SBX::memory
Operation not supported
Operation not supported: ERROR <error string>
Operation already in progress: dr@0:SBX::cpuY
Operator confirmation for quiesce is required: dr@0:SBX::memory
Psrinfo fails.
Recovery fails
There is not enough swap space.
Unexpected internal condition: drmach.c #
Unexpected internal condition: SBX
Unrecognized platform command: #
Unsafe driver present: <driver name|major #> ...
Usage: drc -connect sbXY [-reset]
Usage: drc -connect {sbXY | sbXY-N} [-reset]
Usage: drc -disconnect sbXY [-reset]
Usage: drc -disconnect {sbXY | sbXY-N} [-reset]
Usage: drc -disconnect sbXY -next PID [-reset]
Usage: drc -disconnect {sbXY | sbXY-N} -next PID [-reset]
Usage: drc -disconnect sbXY -keep
Usage: drc -disconnect {sbXY | sbXY-N} -keep
Usage: drc -abort
Usage: adrc -connect sbXY [-reset]
Usage: adrc -connect {sbXY | sbXY-N} [-reset]
Usage: adrc -disconnect sbXY [-reset]
Usage: adrc -disconnect {sbXY | sbXY-N} [-reset]
Usage: adrc -disconnect sbXY -next PID [-reset]
Usage: adrc -disconnect {sbXY | sbXY-N}-next PID [-reset]
Usage: drcstat -board [sbXX | all]
Usage: drcstat -board [sbXY | sbXY-N | all] [-xpar]
Usage: drcstat -system [sbXX]
Usage: drcstat -system [sbXY| sbXY-N] [-xpar]
Usage: drcstat -device [sbXX] [-e]
Usage: drcstat -device [sbXY | sbXY-N] [-e] [-xpar]
VM viability test failed: dr@0:SBX::memory
