Machine Administration Guide 2.6
Contents Index PreviousNext
Appendix B Disk Drive Replacement> B.3 Flow of Preventive Replacement> B.3.2 Unmounting disks

B.3.2.3 When using volume management software other than SynfinityDisk/GDS

When using volume management software other than SynfinityDisk/GDS, follow the procedure below to perform the unmount operation.

  1. Use the volume management software to unmount the relevant disk from the volume. For the operation procedure, refer to the manual for the relevant software.
  2. After unmount from the volume management software is completed, use the diskswap command to notify Machine Administration. For the diskswap command argument, specify the logical device path of slice No. 0 of the relevant disk. 
    # /usr/sbin/FJSVmadm/diskswap add <logical device path>

    In this case, electrical disconnection is performed by the Machine Administration menu operation executed during replacement.

Contents Index PreviousNext
All Rights Reserved, Copyright(C) FUJITSU LIMITED 2001-2005
All Rights Reserved, Copyright (C) PFU LIMITED 2001-2005