Machine Administration Guide 2.6
Contents Index PreviousNext
Chapter 3 Model Family-Specific Information> 3.2 PRIMEPOWER250/450> 3.2.14 Firmware Administration

3.2.14.2 Update Firmware of Main Unit

This section describes how to perform the Update Baseboard Firmware operation.

The following operation should only be performed by a certified service engineer.

Show/Update Current Baseboard Firmware

Operation

  1. From the Hardware Control Program (HCP) Administration menu, select [Update Baseboard Firmware].
  2. From the Update Baseboard Firmware menu, select [Show/Update Current Baseboard Firmware].

    Information about which firmware has been applied to the main unit is displayed.

  3. Select the firmware to be applied to the current environment from among the registered firmware, and perform the required operations according to the menu.

    The selected firmware is applied to the main unit.

Update History

Operation

  1. From the Hardware Control Program (HCP) Administration menu, select [Update History].
  2. From the Update Baseboard Firmware menu, select [Update History].

    The update history of the main unit firmware is displayed.

Contents Index PreviousNext
All Rights Reserved, Copyright(C) FUJITSU LIMITED 2001-2005
All Rights Reserved, Copyright (C) PFU LIMITED 2001-2005