Machine Administration Guide 2.6

3.2.14.1 HCP File Operation

This section describes how to use HCP File Operation.

The following operation should only be performed by a certified service engineer.

Show/Delete the Registered HCP

Operation

1. From the Hardware Control Program (HCP) Administration menu, select [HCP File Operation].
2. From the HCP File Operation menu, select [Show/Delete the Registered HCP].

   A list of the registered firmware appears.

3. To delete firmware, select the firmware to be deleted from the list and perform operations according to the menu.

   The selected firmware is deleted.

Show/Register the Supply HCP

Operation

1. From the Hardware Control Program (HCP) Administration menu, select [HCP File Operation].
2. From the HCP File Operation menu, select [Show/Register the Supply HCP].

   Information about firmware stored on the HCP CD-ROM or in the working directory appears.

3. Select the firmware to be registered from the list and perform operations according to the menu.

   The selected firmware is registered.