Machine Administration Guide 2.6

3.2.10.4 XSCF Web Administration

This section describes how to perform XSCF Web Administration.

Operation

1. From the eXtended System Console Facility (XSCF) Administration menu, select [XSCF Web Administration].
2. Specify the following information in the menu:

   XSCF displays or makes various settings using the http protocol. Related to this operation, specify the following:

   • Show Current Configuration

     Lists various settings for the http protocol.

   • Enable/Disable XSCF Web

     Selects the access mode through the http protocol from the following:

     • Enable with Read/Write Mode

       Enables change of settings using the http protocol.

     • Enable with Read/Only Mode

       Enables referencing information using the http protocol.

     • Disable

       Disables the use of the http protocol.

   • Select Locale

     Selects the locale of the displayed web page from the following:

     • C (english)
     • ja (japanese)
   • Appearance of Web Page

     Selects the Web page screen configuration from the following items:

     • Text Only
     • Text and Images
   • Access Control

     Registers or changes the hosts that are allowed to access through the http protocol.

     XSCF cannot be accessed from an IP address other than the allowed IP addresses through the http protocol.

     • IP Address

       Up to 16 IP addresses can be registered. A range of IP addresses cannot be specified.

     • Host X

       If a registered host is selected, changes the current setting.

       If the Return key is pressed with no input, the current setting is deleted.

     • Add an Access-allowed Host

       Adds a new host that is allowed to make accesses.

       If the number of hosts that are already set is 16 or less, select items from the submenu.

     • Save Configuration

       Registers the access-allowed host information in XSCF.