2.7 Maintenance Program Startup Function

Machine Administration Guide 2.6

Contents Index

This function is supported by all models.

This function can also start the diagnostic program and REMCS Agent.

The table below outlines maintenance program startup functions.

The available menu items depend on the main unit model to be monitored.

For a PRIMEPOWER1/200/400/600 or GP7000F model 200/200R/400/400R/400A/600/600R, see Section 3.1.2, "Main Unit Models and Available Menus."

For a PRIMEPOWER250/450, see Section 3.2.2, "Main Unit Models and Available Menus."

For a PRIMEPOWER650/850/900/1500/2500/HPC2500, see Section 3.3.2, "Main Unit Models and Available Menus."

For a PRIMEPOWER800/1000/2000 or GP7000F model 1000/2000, see Section 3.4.2, "Main Unit Models and Available Menus."

Y : This setting is made at installation of the main unit.

*1: This setting is made as required.

- : No setting to be made.

Function name	Outline	Whether or not a setting is made (Name(s) of person(s) in charge are enclosed in parentheses.).
Diagnostic Program	Starts the diagnostic program (FJVTS). The diagnostic program is executed to check the hardware status when the main unit is installed or at hot swapping of hardware components.	-
Remote Setup	Starts the REMCS Agent. The REMCS Agent monitors the main unit and supports customer operation by communicating with the support center via the network. Using the REMCS Agent requires separate contract. For information about the contract, call your Fujitsu sales representative.	Y (Note) (System administrator)

Function name

Outline

Whether or not a setting is made
(Name(s) of person(s) in charge are enclosed in parentheses.).

Diagnostic Program

Starts the diagnostic program (FJVTS).

The diagnostic program is executed to check the hardware status when the main unit is installed or at hot swapping of hardware components.

Remote Setup

Starts the REMCS Agent.

The REMCS Agent monitors the main unit and supports customer operation by communicating with the support center via the network.

Using the REMCS Agent requires separate contract.

For information about the contract, call your Fujitsu sales representative.

Y (Note)
(System administrator)

Note: Make this setting with the REMCS Agent.

For information about FJVTS, see the following manuals:

"SunVTS User's Manual"

"SunVTS Test Reference Manual"

"FJVTS Test Reference Manual"

For information about the REMCS Agent, see the following manual:

"REMCS Agent Operator's Guide" (C112-B067EN)