Machine Administration Guide 2.6 |
Contents
Index
![]() ![]() |
Chapter 2 Machine Administration Functions |
This function is supported by all models. SMC provides the firmware management function for the PRIMEPOWER800/1000/2000 model group, the PRIMEPOWER900/1500/2500/HPC2500 model group, and the GP7000F model 1000/2000 group. Accordingly, use SMC for these model groups.
The firmware management function makes firmware registration or deletion and updates firmware.
The table below outlines the firmware management functions.
The available menu items depend on the main unit model to be monitored.
For a PRIMEPOWER1/200/400/600 or GP7000F model 200/200R/400/400R/400A/600/600R, see Section 3.1.2, "Main Unit Models and Available Menus."
For a PRIMEPOWER250/450, see Section 3.2.2, "Main Unit Models and Available Menus."
For a PRIMEPOWER650/850/900/1500/2500/HPC2500, see Section 3.3.2, "Main Unit Models and Available Menus."
For a PRIMEPOWER800/1000/2000 or GP7000F model 1000/2000, see Section 3.4.2, "Main Unit Models and Available Menus."
Y : This setting is made at installation of the main unit.
*1: This setting is made as required.
- : No setting to be made.
Function name |
Outline |
Whether or not a setting is made |
---|---|---|
HCP File Operation |
Registers or deletes firmware. The following HCP File Operation menu items are provided.
|
*1 |
Update BaseBoard Firmware of Main Unit |
Updates main unit firmware information. The following Main Unit Firmware Update menu items are provided.
|
- |
Disk Drive Firmware Administration |
Updates disk drive firmware. The following Disk Drive Firmware Administration menu items are provided.
|
*1 |
Contents
Index
![]() ![]() |