5.1.2 For GP7000F models 200/200R/400/400A/400R/600/600R and PRIMEPOWER 200/400/600
pwrctrld: Power switch is pressed. Press power switch again within 5 seconds to start shutdown procedure
- Meaning
- The POWER switch was pressed. Pressing it again within five seconds starts the shutdown process.
pwrctrld: power switch ignored.
- Meaning
- The POWER switch was pressed but was ignored by the scftool(1M) setting.
pwrctrld: failed to start (xxx)
- Meaning
- Could not start the SCF monitoring daemon. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to open pwrctrld pid file.
- Meaning
- Could not create the PID file.
- Action
- Check the capacity of the root file system and whether it is mounted in a write-enabled state.
pwrctrld: halt system.
- Meaning
- System shut down due to an error.
pwrctrld: failed to start power switch procedure (xxx)
- Meaning
- Pressing the POWER switch failed to initiate the shutdown procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start UPS AC down procedure (xxx)
- Meaning
- Failed to initiate UPS switch over procedure when power failed. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start UPS AC recovery procedure (xxx)
- Meaning
- Failed to initiate UPS procedure after power was restored. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start Power Supply Unit failure procedure (xxx)
- Meaning
- Failed to initiate power supply failure procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start FAN failure procedure (xxx)
- Meaning
- Failed to initiate fan failure procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start THERMAL alarm procedure (xxx)
- Meaning
- Failed to initiate abnormal temperature procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to get SCF dump size
- Meaning
- Failed to get dump size of SCF driver.
- Action
- Check the state of the SCF device.
pwrctrld: Illegal SCF dump size.
- Meaning
- The dump size of the SCF driver was 0 or less.
- Action
- Check the state of the SCF device.
pwrctrld: Insufficient memory space for SCF dump
- Meaning
- Could not get enough memory for the SCF driver dump.
- Action
- Allocate memory or a swap area.
pwrctrld: SCF dump failed
- Meaning
- The SCF drive dump process failed.
- Action
- Allocate memory.
pwrctrld: /var/opt/FJSVhwr/scf.dump: System call error message
- Meaning
- Could not create SCF dump file.
- Action
- Check the /var file system.
pwrctrld: cannot write SCF dump file
- Meaning
- Could not create SCF dump file.
- Action
- Check the /var file system.
pwrctrld: failed to start SCFHALT procedure (xxx)
- Meaning
- Failed to initiate SCFHALT procedure. xx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start RCI Power Off procedure (xxx)
- Meaning
- Failed to initiate RCI Power Off procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start Power Off procedure (xxx)
- Meaning
- Failed to initiate Power Off procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to open /var/opt/FJSVhwr/pwrctrld.lock
- Meaning
- Could not open the /var/opt/FJSVhwr/pwrctrld.lock file.
- Action
- Check the /var/opt/FJSVhwr/pwrctrld.lock file.
pwrctrld: SCF daemon is already running.
- Meaning
- SCF daemon is already running.
pwrctrld: lockf() failed
- Meaning
- Failed to get the file to be locked by lockf function.
- Action
- Check the /var/opt/FJSVhwr/pwrctrld.lock file.
/etc/rc0.d/K00FJSVscf: scfreport shutdown was executed.
- Meaning
- Reported the start of system shutdown to SCF device.
This message might be stored in message log (/var/adm/messages) as "daemon.error". However, it is not abnormal.
FJSVscf: The system power down is executed 30 seconds later.
- Meaning
- The power off of the system is begun 30 seconds later. This message shows the state.
This message might be stored in message log (/var/adm/messages) as "daemon.error". However, it is not abnormal.
All Rights Reserved, Copyright(C) FUJITSU LIMITED 2005
