5.1.1 For PRIMEPOWER 1
pwrctrld: Power switch is pressed. Press power switch again within 5 seconds to start shutdown procedure
- Meaning
- The POWER switch was pressed. Pressing it again within five seconds starts the shutdown process.
pwrctrld: power switch ignored.
- Meaning
- The POWER switch was pressed but was ignored by the scfconf(1M) setting.
pwrctrld: failed to start (xxx)
- Meaning
- Could not start the SCF monitoring daemon. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to open pwrctrld pid file.
- Meaning
- Could not create the PID file.
- Action
- Check the capacity of the root file system and whether it is mounted in a write-enabled state.
pwrctrld: halt system.
- Meaning
- System shut down due to an error.
pwrctrld: failed to start power switch procedure (xxx)
- Meaning
- Pressing the POWER switch failed to initiate the shutdown procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start Power Supply Unit failure procedure (xxx)
- Meaning
- Failed to initiate power supply failure procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start FAN failure procedure (xxx)
- Meaning
- Failed to initiate fan failure procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start thermal alarm procedure (xxx)
- Meaning
- Failed to initiate abnormal temperature procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start SCFHALT procedure (xxx)
- Meaning
- Failed to initiate SCFHALT procedure. xx represents the system call that failed.
- Action
- Allocate memory or a swap area.
pwrctrld: failed to start Power Off procedure (xxx)
- Meaning
- Failed to initiate Power Off procedure. xxx represents the system call that failed.
- Action
- Allocate memory or a swap area.
/etc/rc0.d/K00FJSVscf: scfreport shutdown was executed.
- Meaning
- Reported the start of system shutdown to SCF device.
This message might be stored in message log (/var/adm/messages) as "daemon.error". However, it is not abnormal.
FJSVscf: The system power down is executed 30 seconds later.
- Meaning
- The power off of the system is begun 30 seconds later. This message shows the state.
This message might be stored in message log (/var/adm/messages) as "daemon.error". However, it is not abnormal.
All Rights Reserved, Copyright(C) FUJITSU LIMITED 2005
