Enhanced Support Facility 2.6 User's Guide

3.13.1.5 recover subcommand

DESCRIPTION

recover subcommand restores the communication path failed by various errors.
This subcommand can be executed if the message "offline" is not displayed using the info or status subcommands.
Successfully completing this subcommand changes the communication path into the "stop" state.
If you specify a communication path name, this subcommand will be performed for the specified communication path. If you use the communication path unless essential error cause is removed, the communication may be brought back to the "fail" state, depending upon the hardware failure.

SYNOPSIS

/usr/opt/FJSViomp/bin/iompadm -c class-name recover /dev/FJSVhwr/fiomp/mscf0 [Communication PathName]

EXAMPLE

#  /usr/opt/FJSViomp/bin/iompadm  -c  FJSVscf3  recover  /dev/FJSVhwr/fiomp/mscf0 /dev/FJSVhwr/scfc0