Enhanced Support Facility 2.6 User's Guide

3.4 scftool(1M)

NAME

scftool - GUI controlling SCF features

SYNOPSIS

/opt/FJSVhwr/sbin/scftool

AVAILABILITY

FJSVscu, FJSVscu2

DESCRIPTION

scftool is a GUI tool for controlling the following SCF features:

The following models can use this command.

• GP7000F model 200/200R/400/400A/400R/600/600R/1000/2000
• PRIMEPOWER 200/400/600/800/1000/2000

Power switch settings

Number of times in which power switch until the shutdown beginning is pushed can be set.
The setting can select "Single(1 time)", "Double(2 times)" or "ignore". The default setting is "Double".

System clock setting

Specifies whether it is preferred to use the system standard clock or to adjust the time of the system standard clock using the SCF high-resolution clock that has a lower degree of error.
The following models can use this setting.

• GP7000F model 200/200R/400/400A/400R/600/600R and PRIMEPOWER 200/400/600

The setting can select "System Default" or "SCF clock". The default setting is "System Default".

Since system time can be changed by date(1) as well as stime(2), adjtime(2), and settimeofday(3C), you must exercise caution when

using the SCF high-resolution clock. In particularly, do not use the SCF high-resolution clock when running NTP (Network Time Protocol) software that utilizes the network to synchronize time.

UPS operation settings

Specifies the time from power down to the beginning of shutdown.
If power does not come up again within the length of delay, this software will start the shutdown process.

The following models can use this setting.

• GP7000F model 200/200R/400/400A/400R/600/600R and PRIMEPOWER 200/400/600

The delay can be set from 0 second to 9999 seconds. The default delay is 5 seconds.

EXIT STATUS

This command returns the following values:

0

Ended normally

>0

Error

NOTES

Only the super user can execute this command.

When GP7000F model 1000/2000 and PRIMEPOWER 800/1000/2000 are used and "power switch settings" is set to differ in each partition, the set value of each partition becomes effective.
For example: When "Single" is specified for a certain partition and "Double" is specified as for another partition, and if power switch is pushed only once, as for the partition which specifies "Single" the shutdown is done.

SEE ALSO

scfdate(1M)