| Enhanced Support Facility 2.6 User's Guide |
|
Contents
Index
|
| Part 1 SCF Driver Features | > Chapter 1 Main Cabinet | > 1.3 Server Setup | > 1.3.2 Feature Settings |
For the following models, this section need not be referred to because UPS cannot connect by the UPS interface.
Connecting a UPS (Uninterruptible Power Supply) to the system allows you to shut down the system gracefully following a power down. In addition, if the power down is only for a few seconds, you may not want a system shutdown. The system allows you to set the operation time following a power down. This time is known as the UPS operation time.
UPS operation time is the length of delay prior to this software automatically starting the shutdown process. It can be set from 0 second to 9999 seconds. The default delay is 5 seconds. If power returns within the UPS operation time, the system will continue to operate.
UPS operation time is influenced by the UPS's capacity and specifications, time required to shutdown the system, UPS charge level, and other factors. Make sure you perform through tests before deciding on the appropriate UPS operation time.
When the following models are used, SCF driver does not have the setting. Set it by the Machine Administration.
Refer to the "Machine Administration Guide" for the setting method.
|
Contents
Index
|