PRIMECLUSTER Global Link Services Configuration and Administration Guide: Multipath Function (for Solaris(TM) Operating Environment)
Contents PreviousNext

Appendix A Messages

A.6 mpnetlinkwatch Command Messages

Description of messages output at the mpnetlinkwatch command and the workaround are explained.

[List of messages]

Message

Description

MPNET: mpnetlinkwatch: Not super-user

Meaning

The command failed because an authority other than the super-user tried to execute.

Workaround

Execute the command as super-user.

MPNET: mpnetlinkwatch: /etc/opt/FJSVmpnet/conf/config not found

Meaning

/etc/opt/FJSVmpnet/conf/config file is missing.

Workaround

Verify the file is installed correctly. Contact your technical support if problem persists.

MPNET: mpnetlinkwatch: /etc/opt/FJSVmpnet/conf/config XXX not found

Meaning

The specified interface name (XXX) is not found in the /etc/opt/FJSVmpnet/conf/config file.

Workaround

Confirm whether the specified interface name is correct or it is defined as /etc/opt/FJSVmpnet/conf/config.

MPNET: mpnetlinkwatch: /etc/opt/FJSVmpnet/conf/config mpnetX illegal media type yyy

Meaning

There is an error in the media type defined in the /etc/opt/FJSVmpnet/conf/config file for the specified interface name (mpnetX).

Workaround

Verify the media type (yyy) of the interface name (mpnetX) defined in the /etc/opt/FJSVmpnet/conf/config file.

MPNET: mpnetlinkwatch: malloc error NNNN

Meaning

An insufficient memory condition occurred while executing this command (NNNN indicates the error information)

Workaround

Increase memory to solve the problem and retry the command again.

MPNET: mpnetlinkwatch: /dev/mpnet open error NNNN

Meaning

The /dev/mpnet file open and the activation failed. (NNNN indicates the error information)

Workaround

Contact your technical support.

MPNET: mpnetlinkwatch: mpnetX yyy illegal

Meaning

There is an error in the device name yyy specified by mpnetX.

Workaround

Verify the specified device name.

MPNET: mpnetlinkwatch: mpnetX yyy line error (link down)

Meaning

For device yyy, a transmission path failure (cable missing (Link Down), etc.) was detected.

Workaround

Check whether the communication path is connected correctly. Restore the MPNET by using the iompadm recover command after the cause is solved.

MPNET: mpnetlinkwatch: ioctl(FIOMPMAXPATHNUM) error NNNN

Meaning

Failed to execute the command for the MPNET driver. (NNNN indicates the error information)

Workaround

Contact your technical support.

MPNET: mpnetlinkwatch: ioctl(FIOMPGETPROP) error NNNN

Meaning

Failed to execute the command for the MPNET driver. (NNNN indicates the error information)

Workaround

Contact your technical support.

MPNET: mpnetlinkwatch: ioctl(MPNIOCLINKDOWN) error NNNN

Meaning

Failed to execute the command for the MPNET driver. (NNNN indicates the error information)

Workaround

Contact your technical support.


Contents PreviousNext

All Rights Reserved, Copyright (C) FUJITSU LIMITED 2005