PRIMECLUSTER Global Link Services Configuration and Administration Guide: Multipath Function (for Solaris(TM) Operating Environment)

A.2 MPNET Monitoring Daemon Messages

Description of messages output at the mpnetinit command or mpnetconfig command and the workaround are explained.

[List of Error Messages]

Message	Description
WARNING: MPNET: mpnetd: mpnetd.conf not found	Meaning	The mpnetd.conf file is not found.
	Workaround	Confirm whether MPNET is installed correctly. If the problem persists, contact your technical support.
WARNING: MPNET: mpnetd: mpnetX yyy line error(link down)	Meaning	In device yyy, an abnormal transmission path (cable missing (Link Down), etc.) was detected.
	Workaround	Confirm whether the communication path is connected correctly. Restore the MPNET by using the iompadm recover command after the cause is solved.
WARNING: MPNET: mpnetd: mpnetX yyy line error(ipackets error)	Meaning	In device yyy, a transmission path failure (frequent occurrence of abnormal input packets) was detected.
	Workaround	Check the network equipment (adapter, cables, and switches). Restore MPNET by using the iompadm recover command after the cause is solved.
WARNING: MPNET: mpnetd: mpnetX yyy line error(opackets error)	Meaning	In device yyy, a transmission path failure (frequent occurrence of an abnormal output packet) was detected.
	Workaround	Check the network equipment (adapter, cables, and switches). Restore MPNET by using the iompadm recover command after the cause is solved.