PRIMECLUSTER Global Link Services Configuration and Administration Guide: Multipath Function (for Solaris(TM) Operating Environment)
Contents PreviousNext

Chapter 8 Dynamic Reconfiguration Function> 8.1 Dynamic Reconfiguration function

8.1.4 Display messages

The DR script of the Multipath function outputs messages when the communication path is disconnected and communication cannot be continued because the switching destination path is inactive or invalid. This also occurs if connection or disconnection fails because an abnormality is detected while the DR script is running.
In "Table 8.1 Display Message List," the message of the DR script of the Multipath function and presence of the inquiry for the user is described.

[Table 8.1 Display Message List]

Code

Message

Meaning

Inquiry

0001

When the DR processing is executed for this path, the communication is disconnected.
interface=XX path=YY

If the DR processing is executed for communication path YY in interface XX, the communication will be disconnected.

none

0002

Is the DR processing continued ?

Do you want DR to be continued?

exist

0003

iompadm command abnormal end.
action=ZZ interface=XX path=YY

When subcommand ZZ of the iompadm command for communication path YY in interface XX was executed, it was terminated abnormally.

none


Contents PreviousNext

All Rights Reserved, Copyright (C) FUJITSU LIMITED 2005