| PCI Hot Plug User's Guide I/O device edition - for Solaris (TM) Operating Environment - |
|
Contents
|
| Chapter 1 PCI cards with support for PCI Hot Plug |
The following list shows the PCI cards that support PCI Hot Plug for network devices. When using below PCI cards, please refer to "5.1.1 Network driver configuration changing". Please ask the sales staff about the latest information of PCI Hot Plug supporting cards.
|
Functions |
Product ID |
Software of driver (driver name) |
Operating clock (*1) |
Supporting Functions |
Redundant Software |
|
|---|---|---|---|---|---|---|
|
Hot replacement |
Hot extension |
|||||
|
Ethernet |
X1033A-U X1033A-X |
Solaris OE (hme) |
33MHz |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
PW008FE1 |
FUJITSU PCI 10/100 Ethernet 1.0 or later (enclosed with a PCI card) (*5) |
33MHz |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
PW008QE1 |
FUJITSU PCI Quad 10/100 Ethernet 1.0 or later (enclosed with a PCI card) (*6) |
33MHz |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
PW008QE2 |
FUJITSU PCI Quad 10/100 Ethernet 1.1 or later (enclosed with a PCI card) (*12) |
33MHz |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
PP028GE1U |
FUJITSU PCI Gigabit Ethernet 1.4.1 or later (enclosed with a PCI card) (*7) |
33MHz / |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
PW008GE1 |
FUJITSU PCI Gigabit Ethernet 1.4.1 or later (enclosed with a PCI card) (*7) |
33MHz / |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
PW008GE4 |
FUJITSU PCI Gigabit Ethernet 2.0 or later (enclosed with a PCI card) (*8) (*9) |
33MHz / |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
PW008GE5 |
FUJITSU PCI Gigabit Ethernet 2.0 or later (enclosed with a PCI card) (*8) (*9) |
33MHz / |
OK |
OK |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
|
ATM |
GP7B8AT1U GP7B8AT1X |
FUJITSU PCI ATM 1.2 or later (enclosed with a PCI card) |
33MHz |
OK |
NG (*10) |
*SynfinityLink 2.2 (*3) *PRIMECLUSTER GLS 4.0 or later (*4) |
|
InfiniBand(*11) |
PW028SY1 |
BLASTBAND 1.0 or later |
66MHz |
OK |
OK |
*PRIMECLUSTER GLS 4.1A20 or later |
(*1) Please refer to "2.1.1.2 PCI Hot Plug configure operation" of the "PCI Hot Plug User's Guide" about the operating clock of PCI cards and PCI slots.
(*2) In case of replacing PCI card, the PCI card with which the network interface is not once activated from the time of system booting cannot be exchanged.
(*3) The replacement and expansion are supported only on the Redundant Line Control Function.
(*4) When using the PRIMECLUSTER GLS 4.0, the replacement and expansion are supported only on the Redundant Line Control Function.
(*5) It is necessary to apply the patch 912785-05 or later. Please contact our customer service about the latest patch.
(*6) When using the "FUJITSU PCI Quad 10/100 Ethernet 1.0," it is necessary to apply the patch 912216-09 or later. Please contact our customer service about the latest patch.
(*7) If using the "FUJITSU PCI Gigabit Ethernet 1.4 or earlier," it is necessary to apply the driver version 1.4.1 or later and the patch 912214-03 or later. Please contact our customer service about the latest patch.
(*8) When using Solaris 8 OE, it is necessary to apply the patch 114536-03 or later. Please contact our customer service about the latest patch.
When applying the patch 114536-03 or later, if the patch 912314-01 or later has applied, it is necessary to remove the patch. When removing the patch 912314-01 or 912314-02, the /platform/sun4us/kernel/drv/fjgi.conf file, which defines fjgi interface settings, will be replaced. If you have edited fjgi.conf, please make a backup copy of fjgi.conf beforehand and pick up your own settings and add them to the new one after removing the patch if necessary.
(*9) When using Solaris 9 OE, it is necessary to apply the patch 114994-03 or later. Please contact our customer service about the latest patch.
When applying the patch 114994-03 or later, if the patch 912660-01 or later has applied, it is necessary to remove the patch. When removing the patch 912660-01 or 912660-02, the /platform/sun4us/kernel/drv/fjgi.conf file, which defines fjgi interface settings, will be replaced. If you have edited fjgi.conf, please make a backup copy of fjgi.conf beforehand and pick up your own settings and add them to the new one after removing the patch if necessary.
(*10) System rebooting is needed for hot extension.
(*11) When PCI card is InfiniBand, please refer to "BLASTBAND GUIDE" for the procedure for replacement and expansion.
(*12) Patch 913294-03 or later is needed.
(*13) Redundant software is not supported on Solaris 10 OE.
(*14) In case of using Solaris 10 OE, FUJITSU PCI ATM 1.3 or later is needed.
|
Contents
|