| PCI Hot Plug User's Guide I/O device edition - for Solaris (TM) Operating Environment - |
|
Contents
|
| Chapter 1 PCI cards with support for PCI Hot Plug |
The following list describes the PCI cards that support PCI Hot Plug for file devices. Please ask the sales staff about the latest information of PCI Hot Plug supporting cards.
|
Functions |
Product ID |
Software of driver (driver name) |
Operating clock (*1) |
Supporting Functions |
Redundant Software |
|
|---|---|---|---|---|---|---|
|
Hot replacement |
Hot expansion |
|||||
|
SCSI |
X6540A-U |
Solaris OE (glm) (*2) |
33MHz |
NG (*3) |
NG (*3) |
none |
|
X6541A-U X6541A-X |
Solaris OE (glm) (*2) |
33MHz |
NG (*4) |
OK (*10) |
*Multipath Disk Control 2.2.1 or later (*5) *GR Multipath Driver 1.0.1 or later |
|
|
GP7B8SC1U GP7B8SC1X |
Solaris OE (glm) (*2) |
33MHz |
OK(*11) |
OK |
*Multipath Disk Control 2.2.1 or later (*5) *GR Multipath Driver 1.0.1 or later |
|
|
PP028SC1U PP028SC1X |
FUJITSU PCI SCSI Adapter Driver 1.0 or later (enclosed with a PCI card) |
33MHz |
OK |
OK |
none |
|
|
PW008SC3 |
Solaris OE (fjulsa) |
33MHz / |
NG (*3) |
NG (*3) |
none |
|
|
FUJITSU ULTRA LVD SCSI Host Bus Adapter Driver 1.0 or later (enclosed with a PCI card) |
33MHz / |
NG (*3) |
NG (*3) |
none |
||
|
Fibre Channel |
GP7B8FC1U |
FUJITSU PCI Fibre Channel 2.2 or later (enclosed with a PCI card) (*6)(*7)(*9) |
33MHz |
OK |
OK |
*Multipath Disk Control 2.2.1 or later (*5) *GR Multipath Driver 1.0.1 or later |
|
PW008FC2U |
FUJITSU PCI Fibre Channel 2.2.1 or later (enclosed with a PCI card) (*7) (*9) |
33MHz / |
OK |
OK |
*Multipath Disk Control 2.2.1 or later (*5) *GR Multipath Driver 1.0.1 or later |
|
|
PW008FC3U |
FUJITSU PCI Fibre Channel 2.2.1 Update2 or later (enclosed with a PCI card) (*9) |
33MHz / |
OK |
OK |
*Multipath Disk Control 2.2.1 or later (*5) *GR Multipath Driver 1.0.1 or later |
|
|
PW028FC3 |
Emulex LightPulse FC SCSI/IP Host Bus Adapter driver 6.02f or later (*8) |
33MHz/ |
OK |
OK |
(*13) |
|
|
PW028FC4S |
Emulex LightPulse FC SCSI/IP Host Bus Adapter driver 6.02f or later (*8) |
33MHz/ |
OK |
OK |
(*13) |
|
|
PW028FC5S |
Emulex LightPulse FC SCSI/IP Host Bus Adapter driver 6.02f or later (*8) |
33MHz/ |
OK |
OK |
(*13) |
|
(*1) Please refer to "2.1.1.2 PCI Hot Plug configure operation" of the "PCI Hot Plug User's Guide" about the operating clock of PCI cards and PCI slots.
(*2) In case of using Solaris 8 OE, patch 109885-09 or later is needed.
(*3) Replacement and expansion are not supported due to hardware specifications.
(*4) Replacement is not supported due to hardware specifications.
(*5) Multipath Disk Control load balance option is not supporting PCI Hot Plug.
(*6) If using Solaris 9 OE, it is necessary to apply the "FUJITSU PCI Fibre Channel 2.2 (patch level 08) or later.
(*7) In case of using FUJITSU PCI Fibre Channel 2.2, patch 910936-13 or later is needed. And in case of using FUJITSU PCI Fibre Channel 2.2.1, patch 912069-09 or later is needed.
(*8) Firmware version 1.91a1 or later and Fcode version 1.41a4 or later are required.
(*9) In case of using Solaris 10 OE, FUJITSU PCI Fibre Channel 3.0 or later is needed.
(*10) When connecting a shared device with a cluster system, please attach the shared device to the system after connecting the PCI card and the shared device with each node of the cluster system.
(*11) When a shared device is connected with a cluster system, it is necessary to stop the use of the shared device from the operation node of the cluster system.
(*12) When using Solaris 8 OE, the patch 114632-04 or later is needed.
When applying the patch 114632-04 or later, if the patch 912773-02 or later has applied, it is necessary to remove the patch.
(*13) Please confirm support version from product vendor.
|
Contents
|