PCI Hot Plug User's Guide 2.5.1
Contents
Chapter 3 Operation flow of PCI Hot Plug
> 3.1 Overview of PCI Hot Plug operations
3.1.1 Operation flow of PCI Hot Plug using command line interface
The following operations are available using
cfgadm (cfgadm_pci(1M))
command.
To add PCI cards, refer to "
3.2.1
Check the status of PCI cards
" and "
3.2.2
Add PCI cards
".
To configure PCI cards, refer to "
3.2.1
Check the status of PCI cards
", "
3.2.2
Add PCI cards
" and "
3.2.3
Configure PCI cards
".
To disconnect PCI cards, refer to "
3.2.1
Check the status of PCI cards
" and "
3.2.4
Disconnect PCI cards
".
To remove PCI cards, refer to "
3.2.1
Check the status of PCI cards
", "
3.2.4
Disconnect PCI cards
" and "
3.2.5
Remove PCI cards
".
Contents
All Rights Reserved, Copyright (C) FUJITSU LIMITED 2005
