PCI Hot Plug User's Guide 2.5.1

3.2.2 Add PCI cards

Follow this flow chart to add PCI cards.

Add PCI cards

*1

If the ALARM LED is on, there was an error during the PCI Hot Plug operation. Stop the operation on the slot and contact customer service.

*2

If the READY LED is still on after the power off operation, the hardware might not work correctly. Do not insert any cards into or remove any cards from the slot. The operation might cause a hardware failure and make the system unstable. In that case, please contact customer service.

Other notes

If PCI card runs at a different frequency from PCI slot, refer to "2.1.1 Requirements and notes of PCI Hot Plug operations" and confirm if the PCI card is usable.