Dynamic Reconfiguration User's Guide 2.5.1

7.2 Console Messages

This section explains the console message printed out by DR driver.

The system board notation in DR driver Messages

The system board number in DR driver Messages is represented in a different notation from what is used for DR commands. The following table shows the relationship between these two different notations

The board number relationship between DR command and DR driver Message (Without XPAR)

DR command	DR driver Message
sb00 sb01 sb02 sb03 sb04 sb05 sb06 sb07	SB0 SB1 SB2 SB3 SB4 SB5 SB6 SB7
sb10 sb11 sb12 sb13 sb14 sb15 sb16 sb17	SB8 SB9 SB10 SB11 SB12 SB13 SB14 SB15
sb20 sb21 sb22 sb23 sb24 sb25 sb26 sb27	SB16 SB17 SB18 SB19 SB20 SB21 SB22 SB23
sb30 sb31 sb32 sb33 sb34 sb35 sb36 sb37	SB24 SB25 SB26 SB27 SB28 SB29 SB30 SB31

The board number relationship between DR command and DR driver Message (PRIMEPOWER900/1500 with XPAR)

DR command	DR driver Message
sb00-0 sb00-1 sb00-2 sb00-3	SB0 SB4 SB8 SB12
sb01-0 sb01-1 sb01-2 sb01-3	SB1 SB5 SB9 SB13
sb02-0 sb02-1 sb02-2 sb02-3	SB2 SB6 SB10 SB14
sb03-0 sb03-1 sb03-2 sb03-3	SB3 SB7 SB11 SB15

The board number relationship between DR command and DR driver Message (PRIMEPOWER2500 with XPAR)

DR command	DR driver Message
sb00-0 sb00-1 sb01-0 sb01-1	SB0 SB8 SB1 SB9
sb02-0 sb02-1 sb03-0 sb03-0	SB2 SB10 SB3 SB11
sb04-0 sb04-1 sb05-0 sb05-1	SB4 SB12 SB5 SB13
sb06-0 sb06-1 sb07-0 sb07-1	SB6 SB14 SB7 SB15

---

7.2.1 Console Message List

7.2.2 Message Explanation