Dynamic Reconfiguration User's Guide 2.5.1

7.1.4 drcstat error Messages

Message	Usage: drcstat -board [sbXX | all] Usage: drcstat -board [sbXY | sbXY-N | all] [-xpar] Usage: drcstat -system [sbXY] Usage: drcstat -system [sbXY| sbXY-N] [-xpar] Usage: drcstat -device [sbXY] [-e] Usage: drcstat -device [sbXY | sbXY-N] [-e] [-xpar]
Cause	Wrong command option

Message	drcstat: Specified system board is not installed.
Cause	Specified system board is not installed.
Remedy	Be sure the specified system board is installed

Message	drcstat: not super user
Cause	Executed command by non super user
Remedy	Execute command by super user

Message	drcstat: dr module is not found.
Cause	DR module cannot be found.
Remedy	Ensure FJSVdr package is properly installed.

Message	drcstat: cannot open /dev/FJSVhwr/pwrctl2: system call error Message
Cause	Cannot access to SCF driver.
Remedy	Ensure SCF driver package is properly installed.

Message	drcstat: ioctl() failed: system call error message
Cause	Displayed "Operation not supported": This firmware version doesn't support DR. Displayed "Device busy": Cannot access to SCF because SCF is busy. Otherwise: failed to access to SCF driver.
Remedy	Displayed the "Operation not supported": Please contact our customer service. Displayed "Device busy": Wait for a while and re-execute drcstat. Otherwise: Ensure FJSVscd2 package is properly installed.

Message	drcstat: /dev/openprom ioctl() failed :X: system call error message
Cause	Cannot access to openprom.
Remedy	Wait for a while and re-execute drcstat command.

Message	drcstat: malloc() failed.
Cause	Failed to allocate memory
Remedy	Check swap allocation or memory resources and try again.

Message	drcstat: System call failed.
Cause	The system call failed.
Remedy	Check swap allocation or memory resources and try again.

Message	drcstat: dr_info terminated abnormally(X).
Cause	dr_info command failed.
Remedy	Wait for a while and re-execute drcstat command. Otherwise respond in the manner directed by the system console message

Message	drcstat: Specified system board does not exist in current partition.
Cause	The specified system board does not exist in the current partition.
Remedy	Check the specified system board.

Message	drcstat: DR is not supported.
Cause	1) DR operation was executed with the 32bit Solaris system or older Solaris release such as Solaris 7 OS. OR 2) DR operation is executed on hardware that does not support DR.
Remedy	For requirements of DR process, please refer to "1.2 DR Requirements"