The name used to identify the network pool is displayed.
The type of the network pool is displayed.
The priority for automatic selection of resources when multiple network pools are available is displayed.
The label for the network pool is displayed.
Comments for the network pool are displayed.
The total number of IP addresses registered in the network pool is displayed.
The number of unused IP addresses registered in the network pool is displayed.
The network resource name is displayed.
Whether it is being used as an admin LAN is displayed.
When used as an admin LAN
"yes" is displayed.
When not used as an admin LAN
"no" is displayed.
The LAN for iSCSI boot is displayed.
The VLAN ID for the network resource is displayed.
The subnet address of the network resource is displayed.
The subnet mask of the network resource is displayed.
The total number and number of unused IP addresses registered in the network resource are displayed.
The network device name is displayed.
The model name is displayed.
The operational status of the network device is displayed.
The available usage for the network device is displayed.
The ruleset name is displayed.
The name of the network device that has been allocated is displayed.
Network Device Attributes
For details, refer to "A.6.4 Network Device Attributes".
Network Resource Attributes
The network resource name is displayed.
The network resource is displayed.
The label for the network resource is displayed.
Comments for the network resource are displayed.
The total number of IP addresses registered in the network pool is displayed.
The number of unused IP addresses registered in the network pool is displayed.
Whether it is to be used as an admin LAN is displayed.
When used as an admin LAN
"yes" is displayed.
When not used as an admin LAN
"no" is displayed.
The LAN for iSCSI boot is displayed.
If no virtual network, virtual switch, or port group corresponding to the network resource exists, information on whether those resources will be automatically configured is displayed.
If the checkbox is not selected
Configuration is performed automatically.
This option is not selected by default.
If the checkbox is selected
Resources that have already been created are configured for the network resource.
Whether automatic VLAN configuration for uplink ports is performed is displayed.
When automatic configuration is performed
"yes" is displayed.
When automatic configuration is not performed
"no" is displayed.
The start address of the IP addresses to be automatically configured is displayed.
The end address of the IP addresses to be automatically configured is displayed.
The subnet address of the network resource is displayed.
The subnet mask of the network resource is displayed.
The default gateway is displayed.
The VLAN ID for the network resource is displayed.
The ruleset for the network resource is displayed.
A hyphen ("-") is displayed if the ruleset has not been set.
The physical LAN segment set for the network resource is displayed.
When no physical LAN segment is set, a hyphen ("-") is displayed.
The physical LAN segment item will not be displayed if no server NIC has been defined.
The start address of the IP addresses to be excluded from automatic configuration is displayed.
The end address of the IP addresses to be excluded from automatic configuration is displayed.
The chassis name is displayed.
The switch name is displayed.
The external connection port number of the LAN switch blade is displayed.
For link aggregation, the physical port numbers of the member ports that constitute the link aggregation are displayed.
A hyphen ("-") is displayed if the link aggregation configuration has been released.
If link aggregation, then the link aggregation group name is displayed.
A hyphen ("-") is displayed if a physical port.
The VLAN type is displayed.
When used as Tagged VLAN
"tagged" is displayed.
When used as Untagged VLAN
"untagged" is displayed.
When VLAN is not used
"none" is displayed.
