The name used to identify a physical OS or VM host is displayed.
The IP address on the admin LAN is displayed.
Not displayed for VM guests.
The status of the physical OS, VM host, or VM guest is displayed.
The type of the OS running on the server is displayed.
One of the following is displayed:
Physical OS
VM Host
VM Guest
The type of the OS running on the server is displayed.
The name of the server on which the physical OS, VM host, or VM guest is operating is displayed.
Not displayed for VM guests.
The link to the allocated L-Server information.
See
Refer to "11.2 Resource Status" in the "Operation Guide CE" for details on resource statuses.
The following information is displayed only for VM Hosts.
The type of the VM is displayed.
The name of the VM software used is displayed.
The version and level of the VM software used is displayed.
The number of VM guests is displayed.
The link to the web interface of a server virtualization software is displayed.
A list of hosted VM guests is displayed.
A list of the VM guests with the selected VM host set as their VM Home Position is displayed.
The following information is displayed only for VM guests.
The type of the VM is displayed.
The name of the VM host on which the VM guest is stored is displayed.
The name of the VM is displayed.
The link to the web interface of a server virtualization software is displayed.
The following information is not displayed for VM guests.
The link to the web interface of a server management software is displayed.
Displayed only when PRIMERGY servers, PRIMEQUEST servers, or SPARC Enterprise servers are selected.
IP address of the remote management controller is displayed.
Displayed only for servers other than PRIMERGY BX servers.
The following information is not displayed for VM guests or SPARC Enterprise servers.
The latest version of the system image is displayed.
The date and time of the most recent system image backup is displayed.
Comments describing the system image are displayed.
The following information is not displayed for VM guests.
Displays the name of the physical server that will be replaced when server switchover occurs.
Displays the name of the physical server that is currently running.
The method used to perform server switchover is displayed.
The boot type of the system disk is displayed.
Shows whether automatic server recovery is enabled or not.
Shows whether network settings will be automatically adjusted during server switchover.
The setting whether the spare server is turned off forcibly when switching over to the spare server is displayed.
The setting whether the server is switched to a VM host on which a VM guest exists is displayed.
Displays the name of the physical server that will replace the current active server when server switchover occurs.
The following information is not displayed for VM guests or SPARC Enterprise servers.
The WWNN set on the HBA is displayed.
The first WWPN set on the HBA is displayed.
The WWPN should be set to the I/O address of each HBA (in descending order).
Therefore, for rack mount or tower servers, the order may not correspond with port number order described for the HBA.
The second WWPN set on the HBA is displayed.
The WWPN should be set to the I/O address of each HBA (in descending order).
Therefore, for rack mount or tower servers, the order may not correspond with port number order described for the HBA.
The following information is not displayed for VM guests.
The mounted position (index) of each network interface on the server is displayed.
The port VLAN IDs set on the LAN switch ports connected to each network interface are displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in IBP mode, "(IBP)" is displayed.
The tagged VLAN IDs set on the LAN switch ports connected to each network interface are displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in IBP mode, "(IBP)" is displayed.
The mounted position (index) of each network interface on the server is displayed.
The names of the port groups set on the LAN switch ports connected to each network interface (for LAN switch blades operating in IBP mode) are displayed.
Only "-" is displayed under the following conditions.
The corresponding LAN switch is not registered
The corresponding LAN switch is not operating in IBP mode
The corresponding LAN switch port has not been assigned to a port group
The time-out value (in seconds) for ping monitoring is displayed.
The recovery performed when an error is detected is displayed.
The number of times reboot is performed during recovery is displayed.
The following information is not displayed for VM guests or servers other than SPARC Enterprise servers.
The WWPN value of the port n is displayed.
Values set by users are reflected on WWPN.
The WWPN for the CA connected to the port n is displayed.
The AffinityGroup for the CA connected to the port n is displayed.