ServerView Resource Orchestrator Cloud Edition V3.1.0 User's Guide for Infrastructure Administrators (Resource Management)

5.4.5 Configuring VLANs on External Connection Ports

When not performing automatic VLAN configuration, use the following procedure to configure VLANs on a LAN switch blade's external connection ports.

1. In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.

   The [VLAN Settings] dialog is displayed.

2. To use this feature, the following settings must first be defined:

   VLAN

   Specify the VLAN ID to assign to a LAN switch blade port.

   Adding a new VLAN ID

   1. Under VLAN, select [Create new].

   2. Enter a VLAN ID number.
      For details on VLAN IDs, refer to the manual of the LAN switch blade to be used.

   Modifying an existing VLAN ID

   1. Under VLAN, select [Change].

   2. Select a VLAN ID.

   Physical Port, Link Aggregation

   Select port numbers to configure or VLAN types of link aggregation group names ([Untagged] or [Tagged]).

3. Click <OK>.

   Check that the VLAN has been set.

4. Select the LAN switch blade in the server resource tree of the ROR console and display the [Resource Details] tab.
   Confirm that the VLAN information is displayed in [VLAN Area] on [Resource Details].