Purpose of This Manual
This manual describes the functionality of ETERNUS SF AdvancedCopy Manager (hereafter abbreviated as "AdvancedCopy Manager").
Intended Readers
This manual is intended for a system administrator who performs storage management using AdvancedCopy Manager.
Structure of This Manual
The structure of this manual is as follows.
This chapter provides an overview of AdvancedCopy Manager.
This chapter describes how to start and stop daemons provided by AdvancedCopy Manager.
This chapter describes how to back up data.
This chapter describes how to use the Suspend/Resume function in the backup operation.
This chapter describes how to use the QuickOPC function in the backup operation.
This chapter describes the replication operation.
This chapter describes the replication operation of AdvancedCopy Manager using the Storage Cluster Continuous Copy function.
This chapter describes how to perform configuration and system maintenance tasks and troubleshooting on the system management information database.
This chapter describes commands.
This chapter describes additional operational notes on Backup and Replication.
This appendix describes the script used for pre-processing and post-processing of backup and restore functionality.
This appendix describes some sample scripts using AdvancedCopy Manager.
This appendix describes the script used for pre-processing and post-processing replication.
This appendix describes how to back up and restore the system volume.
This appendix describes backup operations using the power-saving features of disks in ETERNUS Disk storage system.
This appendix describes the operation using the Oracle Solaris Zones Support function.
This appendix describes backup and restoration of ZFS file systems.
This appendix describes the operation in Oracle VM Server for SPARC.
Conventions
"FUJITSU Storage" and "Fujitsu Storage" are omitted from the names of the products and manuals.
This manual abides by the conventions listed in "Conventions" in the ETERNUS SF Express / Storage Cruiser / AdvancedCopy Manager Documentation Road Map.
Export Controls
Exportation/release of this document may require necessary procedures in accordance with the regulations of your resident country and/or US export control laws.
Trademarks
Microsoft, Windows, Windows Server, Internet Explorer, and Microsoft Edge are registered trademarks of Microsoft Corporation in the United States and other countries.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Linux is a registered trademark of Linus Torvalds.
Red Hat and RPM are registered trademarks of Red Hat, Inc. in the U.S. and other countries.
Novell is a registered trademark of Novell Inc., and SUSE and the SUSE logo is a trademark, of SUSE LLC, in the United States and other countries.
HP-UX is a registered trademark of Hewlett-Packard Company in the United States and other countries.
AIX is a trademark or a registered trademark of International Business Machines Corporation in the United States and other countries.
All other trademarks and product names are the property of their respective owners.
Revision History
Date of Publication | Revision | Document Part Number | |
|---|---|---|---|
HTML | |||
September 2024 | 12.1 | B1FW-6011-12ENZ0(01) | B1FW-6011-12ENZ2(01) |
June 2024 | 12 | B1FW-6011-12ENZ0(00) | B1FW-6011-12ENZ2(00) |
September 2023 | 11 | B1FW-6011-11ENZ0(00) | B1FW-6011-11ENZ2(00) |
February 2023 | 10.2 | B1FW-6011-10ENZ0(02) | B1FW-6011-10ENZ2(02) |
May 2022 | 10.1 | B1FW-6011-10ENZ0(01) | B1FW-6011-10ENZ2(01) |
August 2021 | 10 | B1FW-6011-10ENZ0(00) | B1FW-6011-10ENZ2(00) |
October 2020 | 9.2 | B1FW-6011-09ENZ0(02) | B1FW-6011-09ENZ2(02) |
March 2020 | 9.1 | B1FW-6011-09ENZ0(01) | B1FW-6011-09ENZ2(01) |
November 2019 | 9 | B1FW-6011-09ENZ0(00) | B1FW-6011-09ENZ2(00) |
April 2019 | 8.1 | B1FW-6011-08ENZ0(01) | B1FW-6011-08ENZ2(01) |
December 2018 | 8 | B1FW-6011-08ENZ0(00) | B1FW-6011-08ENZ2(00) |
December 2017 | 7 | B1FW-6011-07ENZ0(00) | B1FW-6011-07ENZ2(00) |
May 2017 | 6 | B1FW-6011-06ENZ0(00) | B1FW-6011-06ENZ2(00) |
October 2016 | 5 | B1FW-6011-05ENZ0(00) | B1FW-6011-05ENZ2(00) |
October 2015 | 4 | B1FW-6011-04ENZ0(00) | B1FW-6011-04ENZ2(00) |
July 2015 | 3.2 | B1FW-6011-03ENZ0(02) | B1FW-6011-03ENZ2(02) |
March 2015 | 3.1 | B1FW-6011-03ENZ0(01) | B1FW-6011-03ENZ2(01) |
January 2015 | 3 | B1FW-6011-03ENZ0(00) | B1FW-6011-03ENZ2(00) |
June 2014 | 2 | B1FW-6011-02ENZ0(00) | B1FW-6011-02ENZ2(00) |
May 2014 | 1.1 | B1FW-6011-01ENZ0(01) | B1FW-6011-01ENZ2(01) |
December 2013 | 1 | B1FW-6011-01ENZ0(00) | B1FW-6011-01ENZ2(00) |
Notes
No part of this manual may be reproduced without permission.
This manual is subject to change without advance notice.
Copyright Notice
Copyright 2013-2024 Fujitsu Limited
Content of Update | Updated Section | Revision |
|---|---|---|
The fonts used in the PDF manual have been changed. | General | 12.1 |
The "FUJITSU Storage" part of the product name has been changed to "Fujitsu Storage". | Cover page | 12 |
Information related to the following devices has been added.
Information related to the following device and software has been deleted.
| General | |
[Note] has been added. | 1.2, Chapter 6 | |
The description has been modified. | 1.4.1, 8.5.8 | |
In [Information], the explanation has been modified. | 6.1.1.1 | |
In [Point], information has been added. | 7.1, Appendix B | |
The section title has been changed. | 8.5.8 | |
The version information has been changed to V16.9A. | Cover page | 11 |
The ETERNUS DX S5 series has been added to the supported storage devices. | 8.5.8 | 10.2 |
The description has been modified. | 9.3.1.4 | 10.1 |
The articles about the product configuration and function overview have been deleted from this manual and they have been moved to the Overview. | General | 10 |
The description indicating that the available software version level may vary depending on the system environment has been clarified. | 1.1.1, 1.1.2 | |
The terms in this manual have been changed to be consistent with the terms in the PRIMECLUSTER GD manuals. | 3.8.3.4, 6.8.3.3, 6.8.3.4, 10.1.6.4, 10.1.7.3 - 10.1.7.5 | |
[Note] has been deleted. | 6.2.1 | |
The adapter name "FCRA" has been changed to "RA". | 6.5.2.2 | |
The work procedure has been modified. | 8.6 | |
Unnecessary description has been deleted. | 9.1.2.1, 9.3.2.2, 9.3.2.4 | |
The command execution example has been modified. | 9.3.1.4 | |
The content of the pre-processing script has been modified. | A.2.1, A.2.3, A.3.1, A.3.3, C.2.2, C.2.4 | |
The manual to refer the details of the AdvancedCopy Manager functions has been changed. | F.4.1, G.1.3, H.3.1 | |
In the Figure 9.4, the explanation of the "stgxfwcmdelsrv" command has been modified. | 9.2 | 9.2 |
A new sub section has been added. | 10.1.1.19 | |
The section title has been changed. | Chapter 1, 1.1, 1.1.1, 1.2, 1.2.1, 1.2.2, 1.3, 1.6.3 | 9.1 |
In [Point], the explanation has been added. | 1.6.3 | |
The section "1.6.4 Combination in Environment Where Earlier Version Number and IPv6 Unsupported Operating System Coexist" of previous version has been deleted. | - | |
Information related to the following devices and software has been deleted.
| General | 9 |
The description for Conventions is changed so that the ETERNUS SF Express / Storage Cruiser / AdvancedCopy Manager Documentation Road Map has been referenced. | "Conventions" in Preface | |
The "Manual Organization and Reading Suggestions" section has been deleted from Preface. | Preface | |
The explanation related to starting and stopping the ETERNUS SF Manager service has been modified. | Chapter 2, 9.4.2 | |
The explanations in stop the SnapOPC+ have been added. | 6.1.1.3, 6.7, 9.3.2.2 - 9.3.2.4, 10.1.5.2 | |
In the table "Processing Differences in Accordance with Operating Status" of [NOTES], information has been added. | 9.3.2.4 | |
Information related to Microsoft Windows Server 2019 has been added. | "Notation" and "Others" in Preface | 8.1 |
The work procedure has been modified. | 8.6, 8.7.2.1, 8.7.2.2 | |
Information related to the ETERNUS DX8900 S4 has been added. | "Notation" in Preface | 8 |
Information related to Solaris 9 has been deleted. | "Notation" in Preface, 1.3.2, F.3 | 7 |
Information related to the ETERNUS DX500 S4/DX600 S4 has been added. | "Notation" in Preface | |
Information related to the ETERNUS AF250 S2/AF650 S2 has been added. | "Notation" in Preface, 8.5.8 | |
[Point] has been added. | 6.5.2.2, F.7.7 | |
The explanation in the table 8.1 and the table 8.2 has been modified. | 8.1 | |
The explanation has been modified. | 10.1.1.14 | |
The MPLB resources have been added for the devices that can use the Oracle Solaris Zones Support function. | F.5 | |
In [See], the explanation has been added. | F.7.1 | |
Information related to Microsoft Windows Server 2016 has been added. | "Notation" and "Others" in Preface | 6 |
Information related to Windows Vista has been deleted. | "Notation" in Preface | |
Information related to SUSE Linux Enterprise Server 11 has been deleted and information related to SUSE Linux Enterprise Server 12 for AMD64 & Intel64 has been added. | "Notation" in Preface | |
Information related to the ETERNUS DX60 S4/DX100 S4/DX200 S4 has been added. | "Notation" in Preface | |
The reference destination related to the combination of the manager program and the agent program has been changed. | 1.1.2 | |
In [Note], information has been added. | 6.1.2 | |
A new condition has been added. | 6.4.7.1 | |
A new section has been added. | 8.5.8 | |
In DESCRIPTION, information has been modified. | 9.2.10 | |
In NOTES, the factors that cannot set the replication volume information have been added. | 9.3.1.1 | |
Information related to HP-UX 11i v1/v2 has been deleted. | "Notation" in Preface | 5 |
Information related to VMware vSphere 4 has been deleted. | "Notation" in Preface | |
Information related to the ETERNUS DX80/DX90 has been deleted. | "Notation" in Preface, 9.3.2.2, 10.1.2, 10.1.9, 10.1.10 | |
Information related to the ETERNUS AF250/AF650 has been added. | "Notation" and "Others" in Preface | |
Information related to the ETERNUS LT60 has been deleted. | "Notation" in Preface | |
The description of referring to the ETERNUS SF Web Console Guide has been added. | 3.4.4, 4.4.4, 5.4.4, 6.4.4 | |
The explanation related to SnapOPC/SnapOPC+ has been modified. | 6.1.1.1, 6.1.1.2, 6.2.3.1 - 6.2.3.5, 6.5.1, 8.4.2, 8.4.2.3, 9.3.2.2, 9.5.1 | |
The operations to change the device configuration have been added. | 8.5.5 | |
The explanation of the item "Manager IP address" has been modified. | 9.2.10 | |
The explanation has been modified. | 10.1.1.13, 10.1.8 | |
Information related to Microsoft Windows Server 2003 has been deleted. | "Notation" in Preface | 4 |
Information related to Windows 10 has been added. | "Notation" in Preface | |
A note has been added. | 3.4.3, 4.4.3, 5.4.3, 6.4.3, F.7.4 | |
The explanation related to the "stgxfwcmmodsrv" command execution has been modified. | 8.5.1 - 8.5.4, 8.5.6.2 - 8.5.6.4 | |
The explanation related to the operating environment during a command execution has been modified. | 9.1, 9.3 | |
A point has been added. | H.4.2 | |
An unnecessary information has been deleted. | H.4.2 | |
Information related to ETERNUS DX8700 S3/DX8900 S3 has been added. | "Notation" in Preface | 3.2 |
The reference destination manual has been modified. | H.4.2 | |
The term "VMware Virtual Volumes" has been changed to "VMware vSphere Virtual Volumes" according to the terms used by VMware, Inc. | Throughout this manual | 3.1 |
Information related to VMware vSphere 6 has been added. | "Notation" in Preface | |
The command name of Figure 6.30 has been corrected. | 6.5.2.2 | |
The Copyright has been modified. | A.2.2.1, A.3.1.1, A.3.2.1, C.2.2.2, C.2.3.1, C.2.3.2 | |
Information related to the ETERNUS DX200F has been modified. | "Others" in Preface | 3 |
Notes for the Advanced Copy function that uses TFOV's have been added. | 1.2.1, Chapter3, Chapter4, Chapter5 | |
The explanation of Storage Cluster Continuous Copy function has been added. | 1.2.2 | |
Solaris 11 has been added to the software condition of ETERNUS Multipath Driver. | 1.3.2, 1.4.1 | |
The explanations of preparations have been modified. | 4.4, 5.4 | |
The explanations of the replication operation of AdvancedCopy Manager using the Storage Cluster Continuous Copy function have been added. | 1.2.1, 1.2.2, Chapter3, Chapter4, Chapter5, Chapter7, 9.1, 9.1.1.3, 9.1.2.1, 9.1.2.3, 9.1.2.8, 9.3.1.1, 9.3.1.4, 9.3.1.5, 9.3.2.1, 9.3.2.2, 9.3.2.3, 9.3.2.4, 9.3.2.6, 9.5.1, 9.5.2, F.2 | |
The corrective procedure when hardware failure occurs in volumes has been modified. | 8.3.2.2,8.4.2.1 | |
The explanation when migrating from ETERNUS SF Manager V16.1 or later has been added to options. | 9.2.16 | |
The support device of the guest domain has been added. | H.4.2 | |
The explanations for the Oracle Database systems have been added. | 1.2.1, 1.2.2, 1.3.1, 1.3.2 | 2 |
Notes regarding the number of simultaneous executions of Concurrent OPC and Concurrent Suspend processes have been modified. | 6.5.1.1, 6.5.2.3 | |
The section regarding the transfer mode of the inter-box synchronous replication has been modified. | 6.5.2.2 | |
The explanations of backup of databases have been modified. | 7.1.2.2 | |
The steps for backing up the data base have been added. | 7.1.2.2 | |
The explanations to restore the data base have been modified. | 7.1.2.3 | |
Notes of the collecting error survey information in the cluster environment have been modified. | 7.2.1.1 | |
The explanations in regard to how to correspond to certain situations have been modified. | 7.3.2.2, 7.4.2.1, 8.3.1.1 | |
The explanations on changing the port number of the Management Server / Managed Server have been added. | 7.5.3 | |
The operating environments of AdvancedCopy Manager for the "swstresrst" command and the "swstsrsemtch" command have been modified. | 8.1 | |
Precautions for when operating on a clustered environment have been added. | 9.1.6 | |
The explanations in regard to energy-saving operation (eco-mode) have been altered. | Appendix E | |
The information related to ETERNUS DX200F has been described. | "Others" in Preface | 1.1 |
