This file is saved at the following location as a detailed setting file of the storage management:
Platform of Manager | Location |
|---|---|
Windows | $ENV_DIR\ESC\Manager\etc\opt\FJSVssmgr\current\sanma.conf |
Solaris OS, | /etc/opt/FJSVssmgr/current/sanma.conf |
Reflecting Contents of Setting File
If the setting file is changed, execute re-read definition file by using Web Console, or reactivate the Manager. This reflects the settings on this software.
Customization
If the Management Server is clustered system which has physical IPs and logical IP, logical IP address must be specified in this parameter. For this parameter, specify only IPv4 format IP address.
Example: LOGICAL_MANAGER_IP="10.12.13.14";
This parameter is used to automatically configure an SNMP Trap destination address for a fault monitoring device when registering devices. Refer to "5.2.6 SNMP Trap Transmission Place Automatic Setting Function" for more information.
If the Management Server is clustered system which has physical IPs and logical IP, logical IP address must be specified in this parameter. For this parameter, specify only IPv6 format IP address.
Example: LOGICAL_MANAGER_V6IP="2001:db8::2:1";
This parameter is used to automatically configure an SNMP Trap destination address for a fault monitoring device when registering devices. Refer to "5.2.6 SNMP Trap Transmission Place Automatic Setting Function" for more information.
This is specified if device detection and registration fail due to the environment having the Management Server which holds multiple IP addresses.
If specifying this parameter in a cluster environment, be sure to specify a logical IP address at the beginning.
For this parameter, specify only IPv4 format IP address.
Example: MANAGER_LAN_CARD_IP="10.12.13.14,100.101.102.103";
This is specified if device detection and registration fail due to the environment having the Management Server which holds multiple IP addresses.
If specifying this parameter in a cluster environment, be sure to specify a logical IP address at the beginning.
For this parameter, specify only IPv6 format IP address.
Example: MANAGER_LAN_CARD_V6IP="2001:db8::2:1,2001:db8::2:2";
When an access path is set, if the zoning setting for the Fibre Channel switch need not be added because port zoning is set, this software does not generally set zoning for Fibre Channel. Specifying 1 in this parameter sets one-to-one WWPN zoning even in the above case (excluding cases in the No Security state):
Example: SET_SW_ZONING_ALWAYS=1; (Default: 0)
Specify whether the SNMP Trap (Cold Start Trap etc.) common to devices from a device is indicated in the event log. Setting 1 for this parameter indicates the SNMP Trap common to devices. Setting 0 for this parameter does not indicate it. Default is 1 (indicate).
Example: DISPLAY_ SNMP_STANDARD_EVENT = 0;
