With this product, it is possible to manage the storage device's connectivity. It is possible to operate with the same operability without being aware of restrictions according to type of storage device and model.
The target device is selected with Web Console, and processing is selected from the Action pane.
The executable operations are as follows:
Display Connectivity Status (Set Up Host, Set Up Port, Reset Group)
Create/Delete Host Affinity
Set Up FC Host/iSCSI Host/SAS Host
Set Up FC Port/iSCSI Port/SAS Port
Set Up Affinity Group
LUN Mapping (direct connection) display
Note
The iSCSI-RA port Transfer Rate cannot be changed in Web Console.
To change a transfer rate, do it with ETERNUS Web GUI.
Setting the IP address, link local IP address, connection IP address, iSCSI name, or iSCSI alias name of an iSCSI port the same as another iSCSI port may not be allowed.
Refer to the following table for information on the duplicate registration:
Storage Model Name | Duplicate Registration | ||||
---|---|---|---|---|---|
IP Address | Link Local IP Address | Connection IP Address | iSCSI Name | iSCSI Alias Name | |
ETERNUS DX series (excluding the ETERNUS DX60 S2) | N/A | N/A | N/A | N/A | N/A |
ETERNUS DX60 S2 | N/A | - | - | N/A | N/A |
A= Available, N/A=Not Available
*1: If the default iSCSI name has been set, it is able to be registered by duplicating.
Setting the IP address, iSCSI name, iSCSI alias name, and iSCSI host name of an iSCSI host the same as another iSCSI host may not be allowed.
Refer to the following table for information on the duplicate registration:
Storage Model Name | Duplicate Registration | |||
---|---|---|---|---|
IP Address | iSCSI Name | iSCSI Alias Name | iSCSI Host Name | |
ETERNUS DX series (excluding the ETERNUS DX60 S2) | A (*1) | A (*1) | N/A | N/A |
ETERNUS DX60 S2 | N/A | A | N/A | N/A |
A= Available, N/A=Not Available
*1: If both the IP address and the iSCSI name are duplicated, it is not available. If one either is not duplicated, it is available.
The function of Multi-VLAN of iSCSI port is not supported.
On Web Console, a basic IP address (#0) can be set or viewed. However, expanded virtual IP addresses (#1 through #15) cannot be set or viewed. Set and view the configuration information of expanded virtual IP addresses (#1 through #15) with ETERNUS Web GUI.
If uppercase letters are used for the iSCSI name of a server and a storage device, the connectivity cannot be managed. To manage the connectivity, do not use any uppercase letters in the iSCSI name.
To delete all the volumes from an affinity group used for Veeam Storage Integration, use ETERNUS Web GUI.