The messages for the CLI Installer are described in alphabetical sequence.
Content:
The unused area in the /tmp file system is too small.
Corrective action:
Allocate at least <TMP_LEAST> KB of space to the /tmp file system, and then execute the command again.
Content:
</usr/sbin/dmidecode> command has not been installed in the target system.
Corrective action:
Check that the OS has been installed with the correct procedure.
Content:
The unused area in the /var file system is too small.
Corrective action:
Allocate at least <VAR_LEAST> KB of space to the /var file system, and then execute the command again.
Content:
The CF driver has been loaded.
Corrective action:
Unload the CF driver, and then execute the command again. For details, see "PRIMECLUSTER Cluster Foundation (CF) Configuration and Administration Guide."
Content:
Execution of the rpm command failed.
Corrective action:
Refer to the log file, and correct the problem that caused the error. Then execute the command again.
Content:
Installation of FJQSS failed.
Corrective action:
Collect the following information and contact field engineers.
/tmp/fjqssinstaller.log
Content:
An internal error occurred.
Corrective action:
Record this message and contact field engineers.
Content:
CDx does not contain the package of the <PROD> product.
Corrective action:
Insert the correct CD in the CD-ROM drive, and then execute the command again.
Content:
CDx does not contain the package of the <PSET> product set.
Corrective action:
Insert the correct CD in the CD-ROM drive, and then execute the command again.
Content:
PRIMECLUSTER does not support this platform.
Corrective action:
Check whether the execution environment supports the conditions described in "Operating Environment" in the Installation Guide for PRIMECLUSTER. If the conditions are satisfied, record this message and contact field engineers.
Content:
Install the product from CD1.
Corrective action:
Insert CD1 in the CD-ROM drive, and then execute the command again.
Content:
This platform does not support installation of the <PROD> product.
Corrective action:
Check that the command option specifications are correct. If they are, check whether the execution environment satisfies the conditions described in "Operating Environment" in the Installation Guide for PRIMECLUSTER. If the conditions are satisfied, record this message and contact field engineers.
Content:
The <PROD1> and <PROD2> products cannot be installed at the same time because they contain a common package <PKG>.
Corrective action:
The <PROD1> and <PROD2> products cannot be specified in the options at the same time.
Content:
This platform does not support installation of the <PSET> product set.
Corrective action:
Check that the command option specifications are correct. If they are, check whether the execution environment satisfies the conditions described in "Operating Environment" in the Installation Guide for PRIMECLUSTER. If the conditions are satisfied, record this message and contact field engineers.
Content:
An inappropriate option was specified.
Corrective action:
Specify the option correctly, and then execute the command again.
Content:
An inappropriate option was specified.
This platform does not support installation of the <PSET> product set.
Corrective action:
Check that the command option specifications are correct. If they are, check whether the execution environment satisfies the conditions described in "Operating Environment" in the Installation Guide for PRIMECLUSTER.
Content:
Another installation process is running.
Corrective action:
Wait until the other installation process ends, and then execute the command again.
If this message is displayed even if another installation process is not running, delete the /tmp/cluster_install and /tmp/cluster_uninstall flag files, and then execute the command again.
Content:
The command was executed with a privilege other than the system administrator privilege.
Corrective action:
Execute the command with the system administrator privilege.
Content:
The package found on the CD will not be installed because a package that is the same or newer than the package found on the CD is already installed in the system.
Corrective action:
To install the package found on the CD, delete PRIMECLUSTER from the target system according to the "Software Uninstallation" described in the Installation Guide for PRIMECLUSTER, and then execute the command again.
Content:
The installation process was stopped by a user request.
Corrective action:
To execute the installation, execute the command again.
Content:
Installation failed.
Corrective action:
See the error message and the log file, and correct the problem causing the error. Then execute the command again.
Content:
See the /var/log/install/cluster_install log file.
Corrective action:
See the log file, and correct the problem causing the error. Then execute the command again.
Content:
See the /var/log/install/cluster_install.x log file.
Corrective action:
See the log file, and correct the problem causing the error. Then execute the command again.
