Purpose of This Manual
This manual describes the how to deliver Advanced Copy functions in environments where AdvancedCopy Manager's agents have not been installed, by using AdvancedCopy Manager Copy Control Module of FUJITSU Storage ETERNUS SF AdvancedCopy Manager (hereafter abbreviated as "AdvancedCopy Manager").
Intended Readers
This manual is intended for system administrators who perform storage management using AdvancedCopy Manager Copy Control Module or Express.
Structure of This Manual
The structure of this manual is as follows.
This chapter provides an overview of AdvancedCopy Manager Copy Control Module.
This chapter explains how to install and set up AdvancedCopy Manager Copy Control Module.
This chapter explains how to operate AdvancedCopy Manager Copy Control Module.
This chapter explains the various commands required for using AdvancedCopy Manager Copy Control Module.
This chapter explains how to collect data when problems occur.
This chapter explains notes on operations of AdvancedCopy Manager Copy Control Module.
This appendix explains the preliminary checks of Advanced Copy status.
This appendix explains backup and restoration of ZFS file systems.
This appendix explains the XML format output function.
This appendix explains Oracle VM Server for SPARC in the operation using AdvancedCopy Manager Copy Control Module.
This appendix explains auto backup/restore of virtual machines in a VMware environment.
This appendix explains Inter-box backup/restore of NAS volumes.
Conventions
This manual abides by the conventions listed in "Conventions" in the FUJITSU Storage ETERNUS SF Express / Storage Cruiser / AdvancedCopy Manager Documentation Road Map.
Export Controls
Exportation/release of this document may require necessary procedures in accordance with the regulations of your resident country and/or US export control laws.
Trademarks
Microsoft, Windows, Windows Server, Internet Explorer, and Microsoft Edge are registered trademarks of Microsoft Corporation in the United States and other countries.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Linux is a registered trademark of Linus Torvalds.
Red Hat and RPM are registered trademarks of Red Hat, Inc. in the U.S. and other countries.
Novell is a registered trademark of Novell Inc., and SUSE and the SUSE logo is a trademark, of SUSE LLC, in the United States and other countries.
HP-UX is a registered trademark of Hewlett-Packard Company in the United States and other countries.
AIX is a trademark or a registered trademark of International Business Machines Corporation in the United States and other countries.
VMware, VMware logo, Virtual SMP, and vMotion are the registered trademarks or trademarks of VMware, Inc. in the United States and other countries.
All other trademarks and product names are the property of their respective owners.
Revision History
Date of Publication | Revision | Document Part Number | |
|---|---|---|---|
HTML | |||
May 2022 | 10.1 | B1FW-6015-10ENZ0(01) | B1FW-6015-10ENZ2(01) |
August 2021 | 10 | B1FW-6015-10ENZ0(00) | B1FW-6015-10ENZ2(00) |
October 2020 | 9.2 | B1FW-6015-09ENZ0(02) | B1FW-6015-09ENZ2(02) |
July 2020 | 9.1 | B1FW-6015-09ENZ0(01) | B1FW-6015-09ENZ2(01) |
November 2019 | 9 | B1FW-6015-09ENZ0(00) | B1FW-6015-09ENZ2(00) |
April 2019 | 8.1 | B1FW-6015-08ENZ0(01) | B1FW-6015-08ENZ2(01) |
December 2018 | 8 | B1FW-6015-08ENZ0(00) | B1FW-6015-08ENZ2(00) |
December 2017 | 7 | B1FW-6015-07ENZ0(00) | B1FW-6015-07ENZ2(00) |
June 2017 | 6.1 | B1FW-6015-06ENZ0(01) | B1FW-6015-06ENZ2(01) |
May 2017 | 6 | B1FW-6015-06ENZ0(00) | B1FW-6015-06ENZ2(00) |
October 2016 | 5 | B1FW-6015-05ENZ0(00) | B1FW-6015-05ENZ2(00) |
June 2016 | 4.2 | B1FW-6015-04ENZ0(02) | B1FW-6015-04ENZ2(02) |
December 2015 | 4.1 | B1FW-6015-04ENZ0(01) | B1FW-6015-04ENZ2(01) |
October 2015 | 4 | B1FW-6015-04ENZ0(00) | B1FW-6015-04ENZ2(00) |
July 2015 | 3.2 | B1FW-6015-03ENZ0(02) | B1FW-6015-03ENZ2(02) |
March 2015 | 3.1 | B1FW-6015-03ENZ0(01) | B1FW-6015-03ENZ2(01) |
January 2015 | 3 | B1FW-6015-03ENZ0(00) | B1FW-6015-03ENZ2(00) |
July 2014 | 2.1 | B1FW-6015-02ENZ0(01) | B1FW-6015-02ENZ2(01) |
June 2014 | 2 | B1FW-6015-02ENZ0(00) | B1FW-6015-02ENZ2(00) |
May 2014 | 1.3 | B1FW-6015-01ENZ0(03) | B1FW-6015-01ENZ2(03) |
April 2014 | 1.2 | B1FW-6015-01ENZ0(02) | B1FW-6015-01ENZ2(02) |
March 2014 | 1.1 | B1FW-6015-01ENZ0(01) | B1FW-6015-01ENZ2(01) |
December 2013 | 1 | B1FW-6015-01ENZ0(00) | B1FW-6015-01ENZ2(00) |
Notes
No part of this manual may be reproduced without permission.
This manual is subject to change without advance notice.
Copyright Notice
Copyright 2013-2022 FUJITSU LIMITED
Content of Update | Updated Section | Revision |
|---|---|---|
Information related to the following software has been added.
| General | 10.1 |
Microsoft Windows Server 2019 is added in the table "Supported OS". | E.5 | |
Information related to the following software has been deleted.
| General | 10 |
The article about the basic system configuration has been deleted from this manual and it has been moved to the Overview. | 1.1 | |
Unnecessary description has been deleted from [Point]. | ||
The manual to refer the details of copy has been changed. | 3.2 | |
In [Point], the explanation has been modified. | 3.2.1.4 | |
A new section has been added. | 6.8 | 9.2 |
Information related to the following software has been added.
| E.5 | 9.1 |
Information related to the following software has been added.
Information related to the following devices and software has been deleted.
| General | 9 |
The description for Conventions has been changed so that the FUJITSU Storage ETERNUS SF Express / Storage Cruiser / AdvancedCopy Manager Documentation Road Map is referenced. | "Conventions" in Preface | |
The "Manual Organization and Reading Suggestions" section has been deleted from Preface. | Preface | |
In [Point], information has been modified. | 2.4 | |
The explanation about stopping the SnapOPC+ has been added. | 2.6, 3.2.1.6, 3.4.4.2, 3.6.7, 3.6.8, 4.6.4 - 4.6.6, 6.1.3, Appendix A | |
In [Note], information has been added and modified. | 3.10.2.2, 3.10.2.3, F.1.1 | |
Information related to Microsoft Windows Server 2019 has been added. | "Notation" and "Others" in Preface, 6.7 | 8.1 |
The explanation has been added in "DESCRIPTION". | 4.9.1 - 4.9.3 | |
Information related to the ETERNUS DX8900 S4 has been added. | "Notation" in Preface | 8 |
The description of "DESCRIPTION" has been modified. | 4.6.4 | |
The explanation for the -p option and the -v option has been modified. | 4.6.6 | |
Information related to Microsoft Windows Server 2016 has been added. | E.5, E.6 | |
VMware vSphere 6.7 has been added in the supported operating environments. | E.5 | |
Information related to Solaris 9 has been deleted. | "Notation" in Preface, 4.10.2 | 7 |
Information related to the ETERNUS DX500 S4/DX600 S4 has been added. | "Notation" in Preface | |
Information related to the ETERNUS AF250 S2/AF650 S2 has been added. | "Notation" in Preface, 1.3, 3.2.1.6, 3.2.2.8 | |
The explanation about the system configuration required for using AdvancedCopy Manager Copy Control Module has been modified. | 1.2, 1.3 | |
[Point] has been added. | 3.2.2.5 | |
The description of step 2 has been modified. | 3.4.1 | |
In [Point], information has been added and modified. | 3.4.1 | |
The command execution example when the option argument is the LU to Partition format or the Partition to LU format has been modified. | 3.4.1, 3.4.4.1, 3.4.4.2 | |
[Note] has been added. | 3.10.3.1 | |
In the table of EXAMPLES, information related to the External RAID Group has been added in the [RG No] item. | 4.2.1 | |
The explanation for the -p option has been added. | 4.5.5, 4.5.6, 4.6.1 - 4.6.6, 4.7.1 - 4.7.7 | |
The explanation for the -v option has been added. | 4.6.5, 4.6.6, 4.9.2 | |
The explanation for the -s option and the -t option has been added. | 4.9.2, 4.9.3 | |
The step 3-i has been added. | E.9 | |
VMware vSphere 6.5 has been added in the supported operating environments. In addition, the explanation has been modified. | E.2, E.5, E.6, E.7.2, E.7.5, E.8, E.9, E.10.1 - E.10.3 | 6.1 |
Information related to Microsoft Windows Server 2016 has been added. | "Notation" and "Others" in Preface | 6 |
Information related to Windows Vista has been deleted. | "Notation" in Preface | |
Information related to SUSE Linux Enterprise Server 11 has been deleted and information related to SUSE Linux Enterprise Server 12 for AMD64 & Intel64 has been added. | "Notation" in Preface, 4.10.2, E.6 | |
Information related to the ETERNUS DX60 S4/DX100 S4/DX200 S4 has been added. | "Notation" in Preface, 1.3, 3.2.1.6, 3.2.2.8 | |
In [Point], information has been added and modified. | 1.3 | |
A new section has been added. | 3.4.3 | |
The description has been modified to the procedure using Partition to LU. | 3.4.4.2 | |
In NOTES, information indicating that the copy source TFOV and the copy destination TFOV must belong to the same TFO group has been added. | 4.5.5 | |
Information related to HP-UX 11i v1/v2 has been deleted. | "Notation" in Preface | 5 |
Information related to VMware vSphere 4 has been deleted. | "Notation" in Preface | |
Information related to the ETERNUS DX80/DX90 has been deleted. | "Notation" in Preface, 1.3, 3.2.2.8, 4.6.2, 4.6.5, 4.7.2, 4.9.1, 6.3, 6.5, 6.6 | |
Information related to the ETERNUS AF250/AF650 has been added. | "Notation" and "Others" in Preface, 1.3, 3.2.1.6, 3.2.2.8 | |
[Point] has been added. | 3.2.1.5 | |
The explanation of SnapOPC+ has been modified. | 4.5.5, 4.6.4 - 4.6.6, 5.2, 6.1, E.2, E.6 | |
Information has been added in the "DESCRIPTION". | 4.10.1 - 4.10.4 | |
Information in the "NOTES" has been deleted. | 4.10.1 - 4.10.4 | |
The error code "0x1E" and "0x2E" have been added to the error code of "Snap Error Suspend" in the "Table 5.1 Causes and Action in Response to Hardware Error". | 5.2 | |
[Note] has been added. | 3.10.1.2, 3.10.2.2 | 4.2 |
In [Note], information has been added. | 3.10.1.3, 3.10.2.3, F.1.1 | |
In [Information], the explanation has been modified. | 3.10.3.1 | |
The explanation in "Access Using CIFS Protocol" has been modified. | 3.10.4 | |
The operation procedure has been modified. | 3.10.6, F.2.3 | |
VMware vSphere 6 has been added in the supported operating environments. | E.5 | |
The explanation for the backup of the NAS environment has been modified. | 3.10.3.1 | 4.1 |
The explanation for the NAS snapshot has been modified. | 3.10.8 | |
The explanation for the inter-box backup of NAS volumes has been modified. | F.1.1, F.3.1 | |
Information related to Microsoft Windows Server 2003 has been deleted. | "Notation" in Preface, 4.10.2, E.6 | 4 |
Information related to Windows 10 has been added. | "Notation" in Preface | |
The explanation for the backup of the NAS environment has been modified. | 3.10.1.3, 3.10.1.4, 3.10.3.1, 3.10.5, 4.8.1 | |
The explanation related to "Deleting NAS Backup Settings" has been added. | 3.10.1.5 | |
Information related to NAS restore has been added. | 3.10.2, 4.8.2 | |
Information related to the inter-box backup/restore of NAS volumes has been modified or added. | Appendix F | |
Information related to the ETERNUS DX8700 S3/DX8900 S3 has been added. | "Notation" in Preface, 3.2.2.8 | 3.2 |
The term "VMware Virtual Volumes" has been changed to "VMware vSphere Virtual Volumes" according to the terms used by VMware, Inc. | Throughout this manual | 3.1 |
Information related to VMware vSphere(R) 6 has been added. | "Notation" in Preface | |
The explanation related to applying Model upgrade options has been modified. | 3.6.9 | |
Description of "NOTES" has been added. | 4.9.1 | |
Information related to the ETERNUS DX200F has been modified or added. | "Others" in Preface, 1.3, 3.2.1.6, 3.2.2.8 | 3 |
Information related to the ETERNUS DX60 S3 has been added. | "Notation" in Preface, 1.3, 3.2.1.6, 3.6.9 | |
The explanation related to Storage Cluster Continuous copy function has been added. | 1.2, 1.4, 3.11, 3.12, 4.5.1, 4.5.3, 5.2, 5.3 | |
The Red Hat Enterprise Linux 7 (for Intel64) has been added as support OS. | 1.5.1, 4.10.2, E.5 | |
The explanation when REC was used has been deleted. | 2.4, 4.1.1, 5.3 | |
The explanation related to VVOL has been added. | 4.9.1, 4.9.2 | |
"Display Example of List Part and Table Part" has been added. | C.2.1 | |
The explanation of the backup/restore using the VMware script has been added or modified. | E.1.1, E.1.2, E.2, E.3, E.5, E.6, E.7.3, E.7.5, E.7.6, E.9, E.11.2 | |
Execute backup/restore while taking NAS snapshot has been changed. | 3.10.8 | 2.1 |
Inter-box backup/restore of NAS volumes has been changed. | Appendix F | |
Note on the number of Concurrent OPCs executed at the same time has been changed. | 3.2.1.7 | 2 |
Inter-box backup/restore of NAS volumes has been added as Appendix F. | 3.10.5, Appendix F | |
Advanced Copy operation using volumes for storage cluster has been added. | 3.11, 4.1.1, 4.1.2, 4.3.1, 5.3 | |
Note has been added to the "acarray add" command. | 4.1.1 | |
The usage example of the "esfsnap" command has been changed. | 4.12.1 | |
Corrective action has been changed. | 5.3 | |
The entire view of backup/restore in VMware virtual environment has been added. | E.1 | |
The point of using multiple ETERNUS Disk storage systems has been added. | E.3 | |
Design of server configuration and notes for constructing virtual machines have been modified. | E.5 | |
Preparation for executing scripts has been modified. | E.6 | |
Output message has been added. | E.10.2 | |
Information related to the ETERNUS DX200F has been added. | "Others" in Preface | 1.3 |
Added the point of using multiple ETERNUS Disk storage systems. | E.3 | 1.2 |
Modified the preparation for executing scripts. | E.5 | |
Referential description as to setup of shared folder within NAS backup volume has been added. | 3.10.1.2, 3.10.2.2, 3.10.3.1 | 1.1 |
The access method by CIFS protocol has been changed. | 3.10.4 |
