With this product, it is possible to manage the storage device's RAID groups. It is possible to operate with the same operability without being aware of restrictions according to type of storage device and model.
The target device is selected with Web Console, and processing is selected from the Action pane.
The executable operations are as follows:
Display the RAID group status
Create/Delete the RAID group
RAID group Eco-mode settings
Note
In this product, the External RAID groups that are used for the Non-disruptive Storage Migration cannot be operated or displayed. Perform these operations with ETERNUS Web GUI.
Point
In the "Display the RAID group status" operation, the following information is also displayed.
Whether there is data access failure in the RAID group during redundancy loss
Whether there is access failure to the disks that configure the RAID group
Note that the above information can be displayed for the following storage devices and firmware versions.
Storage Device | Required Firmware Version |
|---|---|
ETERNUS DX S5 series | V11L50-1000 or later |
ETERNUS DX S4/S3 series (excluding the ETERNUS DX8900 S4) | V10L90-1000 or later |
