ETERNUS SF Express V16.9 / Storage Cruiser V16.9 / AdvancedCopy Manager V16.9 Web Console Guide

10.4 Change FC Switch Information

The procedure to change the FC switch information is as follows:

1. On the global navigation tab, click Network.
   The registered FC switch list is displayed on the Main pane.

2. On the Main pane, check the target FC switch checkbox.

3. On the Action pane, click Delete under Switch.
   The information input screen is displayed.

4. Refer to the following table to enter the necessary information, and then click Modify.

   Item Name	Explanation
   SNMP Community Name(Write)	This is a Write-direction SNMP community name. In order to start/stop beacon, it is necessary to set the Write-direction SNMP community name correctly. The "private" is specified at the time of the device registration. If it does not agree to the value of the FC switch, set a correct value on this screen.

Note

This procedure does not include instructions for:

• Changing any registered IPv4 address to IPv6 address.

• Changing any registered IPv6 address to IPv4 address.

To change the IP address version of any registered FC switch, delete the registered FC switch first and then register the FC switch again.