The program fix list for version 16.3 is as follows.
Version Problem Reported | Problem Report Number | Issue/Problem | Product Name | ||
|---|---|---|---|---|---|
EXP | SC | ACM | |||
16.2 | PH05076 | On the Device Delete screen of AdvancedCopy Manager, deleting a device may display the following error message in the operation log. esccs00191 Cannot accept the operation because a system error has occurred. Performing a setting operation on the screen after the above error message was displayed causes the same error. | Yes | Yes | - |
PH05391 | The NetApp FAS Series (with clustered Data ONTAP) can be managed as a support level "E" device. | - | Yes | - | |
PH05404 | A trial license of the following option licenses is supported:
| Yes | Yes | Yes | |
PH05587 | After performing the Upgrade Installation, access to Web Console fails. | Yes | Yes | Yes | |
PH06201 | Nearline SED and SSD SED disks are supported. | Yes | Yes | - | |
PH06220 | When fetching device information, the GDS device may not be recognized as a device within the ETERNUS Disk storage system. | - | - | Yes | |
PH06258 | On the iSCSI name entry screen of Web Console, uppercase letters cannot be entered. | Yes | Yes | - | |
PH06582 | The ETERNUS DX8700 S3/DX8900 S3 is supported. | - | Yes | Yes | |
PH06642 | Evaluation and relocation of the access status data for Automated Storage Tiering may not work. | - | Yes | - | |
PH07040 | In an environment using VMware vSphere Virtual Volumes, Single Item restore, restore from Clone backup, or the Reload Conf. operation for VM host may fail. | - | - | Yes | |
PH07430 | The registration or the Reload Conf. operation of the ETERNUS DX8700 S3/DX8900 S3 may fail. | - | Yes | Yes | |
16.1 | PH02593 | The usable character string for the password that was added to the ETERNUS DX S3 series can also be specified when registering the ETERNUS DX S3 series on the ETERNUS SF system. | Yes | Yes | Yes |
PH05079 | On the Copy Group Detail screen, the wrong information for the copy source/destination volumes of the copy pair may be displayed. | - | Yes | Yes | |
PH06255 | If an FTV where the total capacity exceeds 15.76 TB is created in a Tier pool, the evaluation and relocation of the access status data for Automated Storage Tiering may not work appropriately for that Tier pool. | - | Yes | - | |
PH06556 | The "stgxfwcmdispdev" command may display device information for servers other than the specified server. | - | - | Yes | |
PH06684 | The "stgxfwcmsetdev" command may terminate abnormally. | - | - | Yes | |
PH07313 | The changing/deleting operation of quota settings may output the ssmgr3000 or ssmgr8025 message and fail. | Yes | Yes | - | |
PH07354 | If creating a shared folder fails, though NAS backup is not set, the information "NAS backup was set" may be displayed on Web Console. | Yes | Yes | - | |
16.0 | PH05443 | If the OS version of the Hyper-V host is Microsoft Windows Server 2012 R2, information related to Hyper-V host is not properly displayed on the End to End View (Hyper-V) screen of Web Console. | - | Yes | - |
PH05914 | The status of the tape library that is displayed in Web Console is not properly recovered from "Unknown". | - | Yes | - | |
PH07799 | When FTV capacity quota share is set by relocation of Automated Storage Tiering, the evaluation may not work properly. | - | Yes | - | |
PH07964 | When silent installation is executed in an OS environment that is not supported by ETERNUS SF Manager or AdvancedCopy Manager Copy Control Module, installation fails. However, no error cause is output in the silent installation log. | Yes | Yes | Yes | |
15.0B | PH05233 | The performance information (active disks, power consumption, and temperature) of the ETERNUS Disk storage system may not be obtained at the specified monitoring interval. | Yes | Yes | - |
PH05418 | If the user/password of the Hyper-V host contains a certain special character, registering the Hyper-V host fails with the swsag9200 message. | - | Yes | - | |
PH05904 | The displayed time in the downloaded CSV file may differ from the graphically displayed performance chart. | Yes | Yes | - | |
PH06259 | When logging in to Web Console, the esccs10100 message may be output and cause an error (system error). | Yes | Yes | Yes | |
PH06392 | The processing instruction according to the AdvancedCopy Manager command or operation through Web Console may terminate abnormally without processing. | - | - | Yes | |
PH06471 | The "acrecbuff stat" command may output incorrect information. | Yes | - | Yes | |
PH06643 | Relocation of Automated Storage Tiering may become suspended (NORMAL_SUSPENDED) before reaching the time set in Automated Storage Tiering Time Limit. | - | Yes | - | |
PH06939 | Multiple information for the same volume may be displayed on the volume Threshold Monitoring Settings screen or the Threshold Monitoring Display screen. | - | Yes | - | |
PH06982 | There may be times when a copy using Concurrent OPC sometimes cannot be started. | Yes | - | Yes | |
PH07144 | When activating ETERNUS SF Manager, the esccs10001 message may be output to the OS log and cause the activation to fail. | Yes | Yes | Yes | |
PH08045 | When using Web Console, the esgui00003 message may be output and cause an error. | Yes | Yes | Yes | |
PH08075 | When the performance management is used, an invalid status may be displayed in the Performance Monitoring Status column on Web Console. | Yes | Yes | - | |
14.2 | PH05949 | The processing instruction according to the AdvancedCopy Manager Copy Control Module command or operation through Web Console may terminate abnormally without processing. | Yes | - | Yes |
PH06672 | The performance monitoring may stop for the ETERNUS DX8000 S2 series if 65,473 or more volumes exist. | - | Yes | - | |
PH06673 | An error may occur in the operation for the ETERNUS DX8000 S2 series that is set with 1,020 or more affinity groups. | - | Yes | Yes | |
13.1 | PG93770 | The error message that is displayed in Web Console may become garbled. | - | - | Yes |
PG93801 | The mount point that is displayed in Web Console may become garbled. | - | - | Yes | |
PH05044 | The "stgxfwcmsetdev" command may output the swstf5405 message and terminate abnormally. | - | - | Yes | |
13.0 | PH03107 | When the performance management feature of the ETERNUS Disk storage systems is in use, a negative value may be output as the performance value of a RAID group and Logical volume. | Yes | Yes | - |
"EXP" indicates Express, "SC" indicates Storage Cruiser, and "ACM" indicates AdvancedCopy Manager.
