ETERNUS SF Express V16.9 / Storage Cruiser V16.9 / AdvancedCopy Manager V16.9 Release Notes

1.7.2 New Functions of Express

1.7.2.1 Compatibility with New Functions of ETERNUS Disk Storage System

Express can use the following functions added for the ETERNUS DX200 S3, ETERNUS DX200F:

• Deduplication and compression of data on a virtual volume

Express can use the following function added for the ETERNUS DX100 S3/DX200 S3:

• Display of Extreme Cache Pool that is composed of SED SSD

Express can use the following function added for the ETERNUS DX60 S3:

• Display of port type "10G Base-T iSCSI"

Express can use the following function added for the ETERNUS DX100 S3/DX200 S3:

• Set and display of encryption mode "AES-256"

Point

To use the above functions, the firmware version of a target storage device must be the firmware version number or later that supports the above functions. In addition, to use the function that sets and displays the encryption mode "AES-256", the application of the latest Program Urgent Fix is required for the Management Server of ETERNUS SF version 16.3.

1.7.2.2 SNMPv3 Protocol Support

SNMPv3 protocol can be used for SNMP communication between the Express's manager and managed devices. Refer to the Express Operation Guide for details.

1.7.2.3 NAS Management Feature

The NAS management function supports the following features to use the ETERNUS DX100 S3/DX200 S3 as a NAS device. Refer to "NAS Management" in the Express Operation Guide for details.

Firmware Version of Device	Usable Features
V10L51 or later	Setting of shared folder name using multibyte characters (Japanese) Setting of access permission for shared folders with CIFS protocol Capacity limit function (Quota management) on a per shared folder basis Display of NAS snapshot settings (Manual mode)
V10L53 or later	Home directory feature Setting of root access allowed hosts for shared folders with NFS protocol

Point

To use the above functions, the firmware version of a target storage device must be the firmware version number or later that supports the above functions. In addition, the application of the Program Urgent Fix to support each firmware is required for the Management Server of ETERNUS SF version 16.3, which is connected to the target storage device.