From version 16.4, the ETERNUS AF250 can be used.
Refer to the Event Guide for information on the event traps notified from the device.
Express can manage the ETERNUS DX100 S3/DX200 S3 and the ETERNUS DX200F that have the following component:
Port type 10G Base-T iSCSI
Express can use the following functions that are added in the ETERNUS DX100 S3/DX200 S3:
Displaying Read Intensive SSDs (RI SSD)
Creating RAID groups, Thin Provisioning pools, and Tier pools that are composed of RI SSDs
Expanding the maximum number of volumes that can be created in the storage device
The ETERNUS DX100 S3 can use a maximum of 4096 volumes and the ETERNUS DX200 S3 can use a maximum of 8192 volumes.
Express can use the following function that is added in the ETERNUS DX200 S3 and the ETERNUS DX200F:
Deduplication and compression of data on a virtual volume
Express can use the following function that is added in the ETERNUS DX60 S3, DX100 S3/DX200 S3, and the ETERNUS DX200F:
SnapOPC+ that uses TPVs as copy destination volumes
Point
To use the above functions, the firmware version of the target storage device must be V10L60 or later.
If the components mounted on the ETERNUS DX60 S3, DX100 S3/DX200 S3 and the ETERNUS DX200F fail/recover, Express updates the device component status automatically.
With this function, you do not need to perform the Reload Conf. operation with the Web Console.
Point
To use the above function, the firmware version of the target storage device must be V10L60 or later.
The link status of the following ports mounted on the ETERNUS DX60 S3, DX100 S3/DX200 S3 and the ETERNUS DX200F can be displayed:
FC port
iSCSI port
SAS port
FCoE port
Point
To use the above function, the firmware version of the target storage device must be V10L60 or later.
