The ETERNUS DX60 S5/DX100 S5/DX200 S5, ETERNUS AF150 S3/AF250 S3 can be used from version 16.8.
Refer to the Event Guide for information on the event traps notified from the device.
Point
To manage the above storage devices, the Program Urgent Fix that makes them available must be applied to the manager program of this software.
The following functions that have been added to the ETERNUS DX60 S5 can be executed from Express:
Expanding the maximum capacity of the Thin Provisioning Pool to 2 PB
Managing the FC-CA board that responds to a 16 Gbps port transfer speed
The following functions that have been added to the ETERNUS DX100 S5/DX200 S5, ETERNUS AF150 S3/AF250 S3 can be executed from Express:
Setting and displaying the Deduplication/Compression of the Thin Provisioning Pool
Expanding the maximum capacity of the Thin Provisioning Pool and Tier Pool to the following capacity
Storage Device Name | Maximum Capacity of Thin Provisioning Pool and Tier Pool |
|---|---|
ETERNUS DX100 S5 | 4 PB |
ETERNUS DX200 S5 | 6 PB |
ETERNUS AF150 S3 | 4 PB |
ETERNUS AF250 S3 | 6 PB |
Displaying the Deduplication/Compression performance information of the Thin Provisioning Volume
Changing the line speed of the REC path (if at least one of the REC connection storage devices is the ETERNUS DX100 S5/DX200 S5, ETERNUS AF150 S3/AF250 S3)
The following functions added to the ETERNUS DX200 S5 and ETERNUS AF250 S3 whose firmware version is V11L40 or later can be operated from Express.
Displaying the GC remaining size of Thin Provisioning Pools enabled with Deduplication or Compression
Displaying the alarm status of Thin Provisioning Pools enabled with Deduplication or Compression
Displaying the alarm status of Container Volumes
Improving the Unaligned I/O rate of the performance information to the effective value
Point
To use the functions added to the ETERNUS DX200 S5 and ETERNUS AF250 S3 whose firmware version is V11L40 or later, the Program Urgent Fix that supports the firmware version must be applied to the manager program of this software.
From version 16.8, the volume capacity of the storage device can be displayed in units of megabytes.
Point
To use the above function, the Program Urgent Fix that provides support for the function must be applied to the manager program of this software.
