When cloning the system of Virtual NIC mode, the following IP addresses must be changed on the copy destination system.
Virtual interface
Monitoring destination IP of the network monitoring function (when the destination HUB is different)
Takeover virtual interface (for cluster system)
Before cloning the system, see the following examples to decide the IP address to be assigned to the copy destination system. Check the IP address of the router on the destination network in advance as well when the copy destination system is connected to the network different from the network on the copy source system.
Below is the design example of how to clone HOST-A of "B.7.1 Example of the Single system."
IP address to be changed | Value in copy source | Value in copy destination | ||
|---|---|---|---|---|
HOST-A | Virtual IP address | sha0 | 192.168.80.1 | 192.168.180.1 |
HUB | 192.168.80.100 192.168.80.101 | 192.168.180.100 192.168.180.101 | ||
Below is the design example of how to clone HOST-A and HOST-B of "B.7.3 Example of the Cluster system (1:1 Standby)."
IP address to be changed | Value in copy source | Value in copy destination | ||
|---|---|---|---|---|
HOST-A | Virtual IP address | sha0 | 192.168.80.1 | 192.168.180.1 |
HUB | 192.168.80.100 192.168.80.101 | 192.168.180.100 192.168.180.101 | ||
HOST-B | Virtual IP address | sha0 | 192.168.80.2 | 192.168.180.2 |
HUB | 192.168.80.100 192.168.80.101 | 192.168.180.100 192.168.180.101 | ||
Takeover virtual interface | sha0:65 | 192.168.80.3 | 192.168.180.3 | |
