For more information on building the cluster application, refer to "Chapter 6 Building Cluster Applications."
The settings described in "6.2 Initial GLS Setup" are not necessary as they are already set up in "I.2.7.1 Initial GLS Setup."
Note
If the icmp communication between cluster nodes is not allowed in the security group configuration, the following message is displayed when the clchkcluster command is executed.
Admin IP <IP address> used by SF is not alive.If this message is output, refer to "I.2.2.2 Creating Virtual Network," and set the icmp protocol rule to allow the icmp communication between cluster nodes. After that, execute the clchkcluster command again.