Content:
The description of the kvmguests.conf file is not correct.
Corrective action:
Check the contents of the kvmguests.conf file and describe the correct information.
Content:
The kvmguests.conf file is not existing.
Corrective action:
Create the kvmguests.conf file.
Content:
The guest domain is not running.
Corrective action:
Start the guest domain.
Content:
The status of the guest domain cannot be obtained.
Corrective action:
Record this message and collect information for an investigation. Then, contact field engineers. For details on how to collect information, see "Troubleshooting" in "PRIMECLUSTER Installation and Administration Guide."
Content:
An option for the host OS is executed on the guest OS.
Corrective action:
Specify the -g option when executing the sfkvmmigrate command on the guest OS. When executing the sfkvmmigrate command on the host OS, execute the command on the host OS again.
Content:
The command is not executed with the root authority.
Corrective action:
Execute the command with the root authority.
Content:
The specified guest domain information is not registered in the kvmguests.conf file.
Corrective action:
Register the specified guest domain information in the kvmguests.conf file.
Corrective action:
Check the following:
If the specified guest domain name is correct.
If PRIMECLUSTER is installed in the specified guest domain.
If sudo is set for the setting to log in the guest OS with any authorities other than the root authority.
If the kvmguests.conf is set correctly.
If the error cause was any one of the above check items, execute this command again.
If the problem is not resolved by the above action, record this message and collect information for an investigation. Then, contact field engineers. For how to collect the investigation information, see "Troubleshooting" in "PRIMECLUSTER Installation and Administration Guide."
Corrective action:
Check if the information of the guest domain that is specified with the sfkvmmigrate command is correct.
Cluster name of guest domain, CF node name
IP address
User name, password
Also connect to the guest OS from the host OS via SSH by using a user for SSH login to the guest OS, and make sure that user inquiries for the first time SSH connection (such as RSA Key Generation) are complete.
If the error cause was any one of the above check items, execute this command again.
If the problem is not resolved by the above action, record this message and collect information for an investigation. Then, contact field engineers. For how to collect the investigation information, see "Troubleshooting" in "PRIMECLUSTER Installation and Administration Guide."
Corrective action:
Specify the correct option and execute the command again.
