The Web-Based Admin View works on the following client environments:
Windows(R)
OS / Web browser
Windows(R) 8.1, Windows(R) 10, Windows Server(R) 2012, Windows Server(R) 2012 R2, Windows Server(R) 2016, Windows Server(R) 2019 / Internet Explorer 11
Windows(R) 10 / Microsoft Edge
When using Windows Server(R), follow the procedure below to register the IP addresses of the primary management server and the secondary management server to the trusted site.
Select [Internet Options] - [Security] tab - [Trusted sites] zone and click <Sites> button.
Add the connection URL of the primary management server and the secondary management server to the Web site.
When specifying the address of the management server 192.168.10.1 (port designation is not necessary)
http://192.168.10.1
Note
To display Japanese, the following requirements need to be satisfied:
The Japanese version of Windows(R) is installed.
Japanese is selected for the language environment used in Windows(R).
Do not uninstall (delete IPv4) IPv4 as stated below:
netsh interface ipv4 uninstall
If IPv4 was accidentally uninstalled, install it again.
netsh interface ipv4 install
If Windows(R) is used for a client that is supported with Web-Based Admin View, the following color pallet problem may occur:
When the GUI screen of Web-Based Admin View is displayed with Windows(R), the 16-bit or 32-bit color mode must be used. The 24-bit color mode does not properly support an alpha component (transparency) that is required for RMS graphs. If 24-bit color is used, RMS graphs may not be displayed properly.
Whether problems will occur in 24-bit color mode depends on the graphics card and video driver being used.
See
For the operating environment of the management server or the monitoring node, refer to "2.1 Operation Environment."
